Kenmore Parts

Light Bulb - 40W

★★★★★

★★★★★

27 Reviews

This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these replacement bulbs are most often used to light the inside of refrigerators and ranges. It features a standard socket base, which means you simply unscrew the burnt-out bulb and screw in the replacement. Depending on the appliance you may require a screwdriver or nut driver to access the light bulb. We recommend you wear work gloves while handling this replacement part. It is constructed of glass and metal and is sold individually. Depending on the appliance and location of the bulb within it, you may want to consider disconnecting power and using a flashlight for easier access to unscrewing and re-screwing in your bulb during this repair.

Door Catch Kit

★★★★★

★★★★★

62 Reviews

This kit contains two door strikes, and three door catches to service dryer doors that have one or two catches.

Multi Rib Belt - 92-1/4"

★★★★★

★★★★★

122 Reviews

This dryer drum belt has four ridges, three grooves and is 1/4" wide.

Touch-Up Paint - White

★★★★★

★★★★★

14 Reviews

18ml

Dryer Thermal Fuse

★★★★★

★★★★★

103 Reviews

Roller Support Tri-Ring

★★★★★

★★★★★

3 Reviews

If you notice that your dryer is noisy or will not tumble, you may need to replace the tri ring. This part is triangular, and is less than an inch in size. Tri rings can be found both on the idler pulley shaft, or on the rear drum roller shaft. In either case, you will need to remove the front panel of the dryer and the drum to access the part for repair. Once you have accessed the damaged tri ring, you will simply need to slip it off and replace it with the new one. This part is sold individually. Be sure to disconnect the power source from the dryer before you begin this repair.

Light Bulb

★★★★★

★★★★★

6 Reviews

Clear, 120 Volt, 40 Watt.

Lower Door Closing Cam

★★★★★

★★★★★

24 Reviews

The lower door closing cam is used in refrigerator doors, it can be located on the fresh food side or the freezer side. It helps hold the door open. This cam is made out of plastic, so it might crack or wear down over time. If your door will not open and close properly you may need to replace the door closing cam. To successfully install this part, you will need a 5/16 nut driver and a small flat blade screwdriver. Before you begin, unplug your appliance and disconnect the water supply. Lubricating this part may help with installation. This replacement part is sold individually. This part will fit both the left and right side of your refrigerator door. To make the repair, remove the top hinge cover, then the top hinge support. Lift the door from the bottom support and remove the old door cams. Replace the cams, using a little lubricant if necessary, and place the door back on the lower hinge support. Replace the top hinge support and your repair is complete!

Capacitor

★★★★★

★★★★★

22 Reviews

This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer.

Hinge Bracket

★★★★★

★★★★★

3 Reviews

This part is used to support the hinge.