Craftsman Parts

Maintain smooth operation of your sander with this durable replacement drive belt. This looped, flexible rubber belt controls the movement of the sanding pad, ensuring consistent and efficient sanding. Over time, belts can wear out, lose elasticity, or break due to regular use or improper installation—leading to unstable or erratic pad movement. To replace the belt, first unplug the sander and remove the fasteners securing the housing cover. Carefully note the routing of the old belt before removing it, then position the new belt in place, ensuring proper alignment and tension. Reattach the housing cover and secure it with the appropriate screws to complete the repair.

It is a genuine OEM sourced 5-inch sanding pad assembly that is specially designed for use with Craftsman orbital sanders. Its purpose is to provide support for hook and loop sandpaper, unfortunately, over time it may wear out or get damaged eventually requiring a replacement. To make the pad last longer do not put to much pressure on the sander when using it, the pressure will create heat and ruin the small hooks on the pad. To replace the pad simply remove the four screws attaching it to the sander and replace it with the new pad. Please note this high-quality component is sold individually.

This is an OEM replacement part and is sold individually. Its propose is to deliver an electric current from an ignition system to the combustion chamber of a gas fueled engine. It will ignite the air fuel mixture by the spark. Spark Plugs will usually have to gapped to the manufactures specifications found in the owners manual. Over time a Spark Plug will become fouled because the air/fuel ratio may be set wrong,worn piston rings, carbon build up and other factors. It is better to replace a fouled spark plug, rather then trying to clean it.

This flat metal washer is a small but essential part of your chainsaw’s drive system. It’s designed to sit between the main drive sprocket and the securing screw, helping to keep everything tightly fastened and running smoothly. If your chainsaw has been skipping or the chain feels loose, this washer might be part of the problem. Because chainsaws experience a lot of vibration, it’s a good idea to replace both the washer and the screw at the same time to ensure a secure, even fit. Sold individually, this washer helps reinforce the drive assembly and can make a big difference in your tool’s performance and reliability.

This genuine DeWalt replacement power cord is built for durability and long-lasting performance, featuring a thick outer rubber insulation that stands up to demanding job site conditions. Designed for double-insulated tools, it includes two wires and two prongs, eliminating the need for a ground wire. The cord measures 10 feet in length and uses heavy-duty 14-gauge wiring, making it ideal for tools that require a robust power connection. This part replaces obsolete part #875692 and is sold individually. Installation involves connecting the bare wire ends to the appropriate terminals and ensuring the cord is routed correctly to prevent pinching when reassembling the tool’s housing. For best results, refer to your tool’s manual or consult a qualified technician.

This pad assembly (PSA), commonly referred to as a sanding disc, is an original manufacturer part used in orbital sanders. It has four attachment points and a diameter of 5 inches. It features a Velcro backing on one side which allows it to securely hold the sandpaper in place during operation for efficient smoothing of surfaces. If the pad breaks, becomes dislodged, or is unable to hold the sandpaper, you will notice inefficient and uneven sanding. Remove the faulty pad assembly by removing the retaining screws. If the screws are damaged, worn out, or the threads are stripped, it is recommended to replace them at the same time for optimal performance. Clean the area and align the new pad with the mounting holes. Install the retaining screws to hold it in place. Each pad assembly is sold individually.

Keep your bit holder secure with this genuine OEM spring for DeWalt impact drivers. Authorized by the manufacturer and sold individually, this durable metal spring is designed to maintain pressure on the N078437 sleeve and the rest of the bit holder assembly, ensuring that the bit stays firmly in place during use. If the spring fails or becomes worn, the bit may no longer be held securely—making replacement essential for safe and effective operation. This part is commonly used in a variety of DeWalt impact drivers and requires only a screwdriver for installation. Simply disassemble the bit holder assembly, remove the worn spring, and install the new one in its proper position to restore full functionality.

This drive sprocket is a key component in your chainsaw, responsible for transferring power from the engine to the cutting chain, enabling it to rotate and cut efficiently. Positioned on the output shaft, it connects directly to the chain mechanism. If you notice signs of wear—such as a loose fit, misalignment, or inconsistent chain movement—it may be time for a replacement. To install a new sprocket, begin by removing the battery, chain cover, chain, and bar. Next, take off the left-handed bolt, disengage the chain brake, and carefully remove the old sprocket. Install the new sprocket along with any required washers to ensure proper alignment and minimize chain vibration. Reassemble the parts, making sure to tighten the bolt counterclockwise. This part is sold individually and is essential for maintaining smooth and safe chainsaw operation.

This Rocker switch has 2 terminals and a compact design for easy installation. This genuine DeWalt replacement part is sold individually. rnrnSwitches are commonly replaced parts in power tools. A switch handles on/off and variable speed functions. They also have a role in electric breaking; they can momentarily reverse electrical polarity. Because switches use mechanical internals, they will degrade and wear out over time, eventually requiring replacement. Some common signs of a broken or failing switch are:rn • The tool has completely stopped functioning - it will not turn on.rn • The tool operates intermittently, requiring multiple tries to turn on, until eventually it won't turn on at all.rn • The variable speed function and electric braking aren't working properly.