Craftsman Table Saw Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Craftsman Table Saw Parts
Your Price
$7.95
Special Order
Craftsman Table Saw Carbon Brush
PartSelect Number PS10076327
Manufacturer Part Number 0502025007
This is a Genuine Manufacturer Sourced replacement part. This is a Carbon Brush with Lead Wire attached and a Spring. This Brush is Sold Individually. Please note Brush Holder is Sold Separately. Carbon motor brushes are one of the most commonly replaced power tool components. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. It is recommended to replace both brushes at the same time. You would need a Screwdriver and Pliers to complete this job.
Your Price
$17.95
Special Order
Craftsman Table Saw Switch Assembly
PartSelect Number PS10078233
Manufacturer Part Number 089110109712
This is a genuine Ryobi Replacement part and is sold individually. Switches are commonly replaced parts in power tools. This is because switches use mechanical internals, causing them to degrade and wear out over time. A switch handles the on/off and variable speed functions. They also have a role in electric breaking; they can momentarily reverse electrical polarity. Some common signs of a broken or failing switch are: • The tool has completely stopped functioning • it will not turn on. • The tool operates intermittently, requiring multiple tries to turn on, until eventually it won't turn on at all.
Your Price
$5.95
Special Order
Craftsman Table Saw Block
PartSelect Number PS10077061
Manufacturer Part Number 089037007033
The block connects to the work plate with hex nuts. This is an authentic Ryobi part sourced directly from the manufacturer for use in table saws. Keep in mind this high-quality part is sold individually. It is made out of metal and will require replacing if it becomes broken. A screwdriver, a set of pliers, and a wrench set may be needed during the installation of this part.
Your Price
$11.95
Special Order
Craftsman Table Saw Wrench
PartSelect Number PS10074928
Manufacturer Part Number 0101010313
This is a genuine OEM approved replacement part used on Ryobi table saws. This wrench allows you to secure or remove a saw blade. Angular profile of this item makes tightening/loosening the arbor nut easy. This wrench is made from metal and it is sold individually.
Your Price
$8.95
Special Order
Craftsman Table Saw Arbor Wrench (15/16-inch)
PartSelect Number PS10074927
Manufacturer Part Number 0101010312
This is a genuine manufacturer supplied replacement part designed for use with Ryobi table saws. This arbor wrench allows you to secure or remove saw blades. An angular profile of this item makes tightening and loosening the blade bolt extremely easy. This wrench is made out of metal and it is sold individually. Please note, the open end wrench is sold separately.
Your Price
$5.95
Special Order
Craftsman Table Saw Elevating Shaft (3/8-16 X 137
PartSelect Number PS10077070
Manufacturer Part Number 089037007042
It is a genuine item that is supplied directly from the original equipment manufacturer for use with Ryobi table saws. This is an identical replacement for a missing or worn elevating shaft that was originally installed on a new unit, please make sure to refer to the appropriate diagrams of your unit for the correct location and application of this component. Keep in mind this high-quality item is made of durable metal and is sold individually.
Your Price
$5.95
Special Order
Craftsman Table Saw Shaft Elevating W/spring Pin
PartSelect Number PS10077401
Manufacturer Part Number 089037011024
This is an authentic replacement part manufactured for use with Ryobi table saws. The shaft connects to the handwheel and is used to raise and lower the height of the blade. This elevating shaft is sold as an individual replacement part, please see model diagram for associative parts.
Your Price
$5.95
Special Order
Craftsman Table Saw Brush Holder
PartSelect Number PS10077077
Manufacturer Part Number 089037007050
This durable plastic brush holder is an authentic OEM sourced item that is sold individually. It is a high quality item that is specially designed for Ryobi table saws. The purpose of this holder is to secure carbon brush in an electric power tool.
Your Price
$6.95
Special Order
Your Price
$5.95
Special Order
Craftsman Table Saw C-ring
PartSelect Number PS10077057
Manufacturer Part Number 089037007029
This is an authentic OEM sourced component which is specially made for use with Kawasaki engines commonly installed on lawn and garden equipment. The part provides an identical replacement for a missing or a faulty c-ring that was installed on a new unit. This high-quality hardware is utilized to secure the block, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this c-ring. Keep in mind this high-quality part is made of durable metal and is sold individually.
Craftsman Table Saw Appliance Types
Popular Craftsman Table Saw Models
Below are the most popular Craftsman Table Saw models we have. Enter your model number in the search box to find your model.
- 315218050 Table Saw
- 900275020 Reciprocating Saw
- 315284610 10" Table Saw
- 315218290 10" Table Saw
- 315349720 Table Saw
- 315218291 Table Saw
- 315228110 Table Saw
- 137248850 Table Saw
- 315284620 10" Table Saw
- 315228490 Table Saw
- 11329991 Bench Saw
- 113299210 10 Inch Direct Drive Table Saw
- 113242721 9 Inch Motorized Table Saw
- 11312080 Bench Power Tool Switch Assembly
- 31517260 Scroller Saw
- 11329902 Craftsman Bench Saw 10 Inch Tilting Arbor
- 113221770 10" Bench Top Table Saw
- 113298140 10-Inch Table Saw
- 113299131 12-Inch Motorized Floor Saw
- 113226830 10-Inch Table Saw