Kenmore Cooktop Parts

Videos!

Your Price

$12.60

Kenmore Cooktop Chrome Drip Bowl - 8 Inch

★★★★★

23 Reviews

PartSelect Number PS11750107

Manufacturer Part Number WPW10196405

This manufacturer-certified drip bowl is also known as a drip pan, and it is designed for use with cooktops and ranges. It sits below 8-inch burner elements and catches drips and spills from the cookware on the burner. The diameter of the drip bowl is approximately 10 inches. This replacement might appear slightly different, but it will fit your appliance. You will need no tools to complete this repair. Simply remove the burner element, remove the old bowl, line up the hole on the new bowl with the terminal block and drop it into place. Make sure the bowl is flat before reinstalling the element. While you have the element out you should inspect the terminals for corrosion, damage, or discolouration. If you notice any of those things you should also replace the element and terminal block. You will need to replace your drip bowl if it is lost, damaged, or can no longer be cleaned. This replacement part is sold individually. To extend the life of your new drip bowl we recommend you clean it regularly with soap and water. We recommend only using the recommended drip bowl for your appliance; generic versions will not fit properly which could affect the performance of your elements and cause long-term damage.

Fixes these symptoms

Element will not heat
See more...

Your Price

$17.70

Kenmore Cooktop Chrome Drip Bowl - 6"

★★★★★

20 Reviews

PartSelect Number PS437596

Manufacturer Part Number 316048414

This drip bowl is sold individually. This part is located beneath the element and catches spills from cooking.

Fixes these symptoms

Element will not heat
See more...

Your Price

$24.05

Kenmore Cooktop Drip Bowl - 8"

★★★★★

18 Reviews

PartSelect Number PS437595

Manufacturer Part Number 316048413

This drip bowl is located beneath the element and catches any spills. It is sold individually and has a diameter of approximately 10 inches.

Fixes these symptoms

Element will not heat
See more...

Your Price

$42.54

Kenmore Cooktop Drip Bowl - 6 Inch

PartSelect Number PS244394

Manufacturer Part Number WB31T10010

This drip bowl, also known as the drip pan or burner bowl, is 6 inches in internal diameter to match the burner, but actually measures closer to 8 inches in total diameter to its outer edges. This authentic manufacturer-approved part is used to catch spills from cooking on the top burner. If your bowls are getting stained, dirty, or rusted, this replacement can solve it. First, remove the element from the stove top, and pull out the old drip pan. Insert the new bowl and make sure it is aligned to where the element is plugged in. Lastly, you can put the element back in. For safety precautions, make sure to unplug the range from the power source and wait until the surface is cool before replacing this part. This part is sold individually, if you are replacing more than one drip bowl on your stove at once, you will need to account for this. To replace, simply pull the old surface elements and burner bowls off, give everything a thorough clean, and install the new parts with no tools necessary.

Videos!

Your Price

$19.49

Kenmore Cooktop Terminal Block Kit

★★★★★

45 Reviews

PartSelect Number PS470125

Manufacturer Part Number 5303935058

This surface burner terminal block kit comes with interchangeable mounting brackets, terminal box, ceramic wire nuts, heat shrink protective tubing and wires.

Fixes these symptoms

Element will not heat
Oven not heating evenly
Will Not Start
See more...

Videos!

Your Price

$17.00

Kenmore Cooktop Drip Bowl - 6 Inch

★★★★★

9 Reviews

PartSelect Number PS2366565

Manufacturer Part Number W10196406RW

This part has been substituted by the manufacturer and has a hole in the center. It no longer has a solid bottom.

Fixes these symptoms

Element will not heat
See more...

Your Price

$19.91

Kenmore Cooktop Range Surface Burner Plug-in Block Kit

★★★★★

6 Reviews

PartSelect Number PS340571

Manufacturer Part Number 330031

This newer-style terminal block kit includes two metal brackets, two pre-crimped wires with terminals, two ceramic wire nuts, a heat shrinking tube, and a mounting screw.

Fixes these symptoms

Element will not heat
Will Not Start
See more...

Your Price

$17.70

Kenmore Cooktop Grate Foot

PartSelect Number PS2353327

Manufacturer Part Number WB02T10461

The Grate Foot is a black rubber part which attaches underneath the grate in order to protect your stovetop from being scratched, which it does by cushioning the grate on your gas range. If this part appears visibly broken or no longer holds in place, which can happen to these feet over time, then it should be replaced. Check your model number and user manual to see if this part is right for you. Because this part is sold individually, make sure to order the quantity that you require. We generally recommend checking all of the grate feet on your appliance and replacing them at the same time, since it is an inexpensive part and they tend to wear out at around the same rate. Spares are good to have in the event of future failures. Before beginning this repair, ensure that the surface is cool to the touch. Simply pull the worn or cracked foot out and install the new grate foot. This process should not require any tools or accessories.

Fixes these symptoms