Kenmore Stove Parts
GET YOUR OFFICIAL Kenmore PARTS TO ENSURE VICTORY
Popular Kenmore Stove Parts
This flat style gas oven igniter has an amperage range between 3.2 to 3.6. This part comes with two ceramic wire nuts.
This flat style gas oven igniter has an amperage range between 3.2 to 3.6. This part comes with two ceramic wire nuts.
What this part fixes:
- Element will not heat
- Gas igniter glows, but will not light
- Gas smell
This closed hinged style bake element is 15-3/4 inches long and 16-5/8 inches wide. The terminal depth is three inches and they are 1-3/4 inches apart.
This closed hinged style bake element is 15-3/4 inches long and 16-5/8 inches wide. The terminal depth is three inches and they are 1-3/4 inches apart.
What this part fixes:
- Element will not heat
- Little to no heat when baking
- Oven is too hot
This refrigerator water filter reduces chlorine taste and odor, lead, mercury, and other listed contaminants in water supplied to the dispenser and ice maker. It fits the specified holder at the front top right of the refrigerator compartment and uses a slide and click installation. Reduced water flow may indicate that the filter needs attention, although other water supply problems can cause similar symptoms. Follow the appliance guide for replacement timing. After installation, flush approximately 1.5 gallons through the dispenser and discard the water before use. This is an OEM part sourced directly from the manufacturer.
This refrigerator water filter reduces chlorine taste and odor, lead, mercury, and other listed contaminants in water supplied to the dispenser and ice maker. It fits the specified holder at the front top right of the refrigerator compartment and uses a slide and click installation. Reduced water flow may indicate that the filter needs attention, although other water supply problems can cause similar symptoms. Follow the appliance guide for replacement timing. After installation, flush approximately 1.5 gallons through the dispenser and discard the water before use. This is an OEM part sourced directly from the manufacturer.
What this part fixes:
- Fridge too cold
- Ice maker dispenses too little ice
- Ice maker not making ice
The temperature sensor detects the temperature within the oven cavity. If your oven is too hot, not heating evenly, or has little to no heat when baking, you may need to replace the temperature sensor. The sensor is usually located in the back of the oven. This is a genuine OEM part. Please make sure to disconnect the power to your range before starting your repair.
The temperature sensor detects the temperature within the oven cavity. If your oven is too hot, not heating evenly, or has little to no heat when baking, you may need to replace the temperature sensor. The sensor is usually located in the back of the oven. This is a genuine OEM part. Please make sure to disconnect the power to your range before starting your repair.
What this part fixes:
- Element will not heat
- Little to no heat when baking
- Little to no heat when broiling
Also known as Probe. The quick connect on this part may be different than your original part. If it doesn't fit, you have to cut off the quick connect and wire together with porcelain wire nuts.
Also known as Probe. The quick connect on this part may be different than your original part. If it doesn't fit, you have to cut off the quick connect and wire together with porcelain wire nuts.
What this part fixes:
- Element will not heat
- Little to no heat when baking
- Little to no heat when broiling
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
This oven temperature sensor, also known as an oven probe, monitors the internal temperature of the oven cavity to ensure accurate and consistent heating. Measuring 6 inches in length and made of durable metal, it’s designed to replace faulty sensors that may cause overheating, uneven baking, or F3/F4 error codes. This genuine replacement part is compatible with select models. Always disconnect power to the appliance before beginning installation for safety.
This oven temperature sensor, also known as an oven probe, monitors the internal temperature of the oven cavity to ensure accurate and consistent heating. Measuring 6 inches in length and made of durable metal, it’s designed to replace faulty sensors that may cause overheating, uneven baking, or F3/F4 error codes. This genuine replacement part is compatible with select models. Always disconnect power to the appliance before beginning installation for safety.
What this part fixes:
- Element will not heat
- Little to no heat when baking
- Oven is too hot
The flat style gas oven igniter included in this kit has a body length of 3-3/4 inches. This kit comes with all of the pieces you need to replace longer ceramic igniters, though this kit can also replace short igniters.
This flat style oven igniter kit is a genuine replacement component designed for use in gas ovens and ranges. It plays a critical role in the ignition process by generating the heat required to open the gas valve and ignite the burner assembly. Suitable for both bake and broil functions, this igniter can replace short and long flat-style igniters but is not compatible with round-style models. If the igniter glows for more than 90 seconds without lighting the burner, or glows only orange or red instead of white-hot, it may be too weak to activate the gas valve and should be replaced. The kit includes the igniter, ceramic wire nuts, insulation pad, metal mounting bracket, multiple plug ends, and an instruction sheet. The igniter body measures approximately 3 ¾ inches, with an internal element
The flat style gas oven igniter included in this kit has a body length of 3-3/4 inches. This kit comes with all of the pieces you need to replace longer ceramic igniters, though this kit can also replace short igniters.
This flat style oven igniter kit is a genuine replacement component designed for use in gas ovens and ranges. It plays a critical role in the ignition process by generating the heat required to open the gas valve and ignite the burner assembly. Suitable for both bake and broil functions, this igniter can replace short and long flat-style igniters but is not compatible with round-style models. If the igniter glows for more than 90 seconds without lighting the burner, or glows only orange or red instead of white-hot, it may be too weak to activate the gas valve and should be replaced. The kit includes the igniter, ceramic wire nuts, insulation pad, metal mounting bracket, multiple plug ends, and an instruction sheet. The igniter body measures approximately 3 ¾ inches, with an internal element
What this part fixes:
- Element will not heat
- Gas igniter glows, but will not light
- Gas smell
This bake element is found on the bottom of the oven.
This bake element is found on the bottom of the oven.
What this part fixes:
- Element will not heat
- Little to no heat when baking
- Oven is too hot
If your oven isn’t heating up or your baked goods are coming out uneven, the bottom heating element might be the issue. This part sits at the base of the oven and provides the heat needed for baking. It’s a strong 2100-watt element that helps cook food evenly. If yours is cracked, burned out, or just not working right, swapping it out can get your oven back in shape.
If your oven isn’t heating up or your baked goods are coming out uneven, the bottom heating element might be the issue. This part sits at the base of the oven and provides the heat needed for baking. It’s a strong 2100-watt element that helps cook food evenly. If yours is cracked, burned out, or just not working right, swapping it out can get your oven back in shape.
What this part fixes:
- Element will not heat
- Little to no heat when baking
- Oven not heating evenly
This six inch chrome drip bowl is intended for use with rolled terminal style plug in surface element units.
This six inch chrome drip bowl is intended for use with rolled terminal style plug in surface element units.