Also known as Probe. The quick connect on this part may be different than your original part. If it doesn't fit, you have to cut off the quick connect and wire together with porcelain wire nuts.
This is a surface burner infinite switch kit for your range or oven. This replacement part activates and deactivates your burner, and controls the burner heat. If you are not getting any heat to your ...
Struggling with an unstable or worn-out oven rack? We have the simple solution to get your oven back to perfect working order - the robust Frigidaire Oven Rack. This dependable part offers a sturdy pl...
This convection element generates heat to support even air circulation and consistent cooking performance. Its high-output design allows for efficient temperature recovery and uniform results. Replaci...
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Sue
July 3, 2023
When I have been baking cookies which I have baked for years they all of a sudden started burning on the bottom and not getting done on top even though I am using the same height of the rack and same cookie sheets! It also makes a strange sound when it’s on that sounds like the convection oven fan is running even though I have never used the convection oven since I have owned it! Can you please help ?
For model number 79046703606
Hi Sue, thank you for the question. Based on the description you have provided, we would recommend checking the temperature sensor, part number PS820208, to fix the issue. We hope this helps!
Hi Art, thank you for reaching out. Based on our research, the height of your model is 36 5/8 inches, the width is 30 inches, and the depth is 28 5/16 inches. We hope this information helps!
Was this helpful?
Thank you for voting!
Walter
January 29, 2023
Do you have a part number for the insulation that covers the oven?
For model number 79046703606
Hello Walter, Thank you for your inquiry. Researching the model number that you have provided, the back insulation is part# PS9493904, and the oven wrap insulation that wraps the top and sides as part# PS6012387. We hope this helps.
Replaced clock control by removing surface burner control knobs and plastic nuts, and then the cover over the oven control. Two screw hold the clock in place, after removal and disconnecting the plug-in you can reinstall the new clock control. The Heat Sensor inside the oven will also need to be replaced. It is located inside the oven and attached with two screws; the back of the oven will need to be removed to unplug. Reverse removal procedure and turn the power back on to the stove.
PF alarm appeared on display. Noticed clicking when cord was moved. Had arced for some time and melted original block. New part slightly different. Only has 3 lugs, old one had six. Stack using washers provided. Take note of colors before disassembly. Use caution while working through access opening. The edges are sharp. Only tools needed are phillips screwdriver, deep socket for lug nuts. Nut driver optional. Hope this is helpful.
Repair was quite easy, as long as you have the instructions for removing the door. The screws that hold the bottom of the door to the fixed hinge are placed into the side of the hinge assembly after removal; this holds the door at a 45 degree angle for easy removal. After that, just place the door on a flat surface and dismantle the door from the inside. The inner glass is contained in a metal frame with another piece of glass; this frame comes apart easily using the clips in each side. The door assembles easily after the glass is replaced; just take your time and give yourself enough room to lay out the parts as you go. Good luck!
