Circular Saw Parts

Your Price

$26.60

PartSelect Number PS10170261

Manufacturer Part Number 381028-08

This is a genuine DeWalt OEM carbon brush, designed to deliver reliable performance and extend the life of your power tool’s motor. Unlike aftermarket or generic alternatives, this replacement part meets DeWalt’s exacting standards for quality and compatibility. It’s a common fix for motor issues and is often one of the first components to wear out—making it a smart and simple solution for restoring tool performance. Each brush is sold individually, though most tools require a pair for proper function. The brush comes exactly as pictured, complete with a carbon block, wire lead, and connection terminal for easy installation. It is compatible with the specific models listed below and is not guaranteed to fit other tools, so please double-check your model before ordering.

Your Price

$55.11

Circular Saw Power Cord

PartSelect Number PS10169913

Manufacturer Part Number 330079-98

This genuine DeWalt replacement power cord is built for durability and long-lasting performance, featuring a thick outer rubber insulation that stands up to demanding job site conditions. Designed for double-insulated tools, it includes two wires and two prongs, eliminating the need for a ground wire. The cord measures 10 feet in length and uses heavy-duty 14-gauge wiring, making it ideal for tools that require a robust power connection. This part replaces obsolete part #875692 and is sold individually. Installation involves connecting the bare wire ends to the appropriate terminals and ensuring the cord is routed correctly to prevent pinching when reassembling the tool’s housing. For best results, refer to your tool’s manual or consult a qualified technician.

Your Price

$5.95

Circular Saw Blade Bolt

PartSelect Number PS10183641

Manufacturer Part Number 648697-00

This genuine DeWalt replacement blade screw is used to secure the saw blade to the spindle or shaft on your circular saw. Made from strong metal, it’s built to hold the blade firmly in place during cutting. You’ll need a wrench or a hex/Allen key to tighten or loosen the screw during blade changes. It’s sold individually, so be sure to check your saw’s manual to confirm it’s the right fit for your model.

Your Price

$15.05

Circular Saw Dust Bag Assembly

PartSelect Number PS12522964

Manufacturer Part Number N273733

This dust bag assembly is a reliable replacement part designed to fit a variety of sanders. It includes a fabric dust collection bag and a plastic cap, measuring approximately 5.5 inches in length and 2.5 inches in diameter. The bag efficiently captures dust and debris generated during sanding, helping to maintain a cleaner, safer workspace. Over time, the bag may wear out or tear, leading to dust buildup, reduced visibility, and potential health risks. Replacing it is quick and easy—no special tools required. Simply detach the old bag, clean the mounting area, and attach the new one to restore effective dust collection.

Your Price

$5.95

Circular Saw Bolt

PartSelect Number PS10166064

Manufacturer Part Number 145344-00

This is an OEM part sourced directly from the manufacturer. The screw is found in Craftsman circular saws. This is a metal part, used to hold other components to the spindle assembly. Please be aware that there are different screws used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You will require a wrench when replacing this item. This part is sold individually.

Your Price

$10.85

Circular Saw Outer Blade Clamp

PartSelect Number PS10166063

Manufacturer Part Number 145343-01

This is a genuine replacement outer blade clamp specially made for circular saws. This part helps to secure the blade to the unit. A wrench would be needed to remove the blade bolt when replacing this clamp. It is made out of metal and it is sold individually.

Your Price

$5.95

Circular Saw Carbon Brush With Wire Lead An

PartSelect Number PS10170841

Manufacturer Part Number 387558-01

Genuine DeWalt replacement part. rnIncludes 1 Carbon Brush with wire lead and terminal in rubber sheath attached.rnrn • Worn brushes are frequently the cause of a poorly running motor. • Replacing brushes can fix an intermittently operating motor. • New brushes can restore a motor's electric braking. Carbon motor brushes are one of the most commonly replaced power tool parts. The reason is that carbon brushes are wear items, meaning that through friction and use they will gradually wear away and eventually will need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, also check your armature for burns, cracks, or other damage which are indications of a larger motor problem needing attention.

Your Price

$18.45

Circular Saw Carbon Brush With Holder

PartSelect Number PS10181326

Manufacturer Part Number 610126-00

Genuine OEM Dewalt replacement Carbon Brush and Holder Assembly. This brush comes complete with carbon brush, spring, and holder. Most brush replacement jobs will require the purchase of two of these brush assemblies. Carbon motor brushes are one of the most commonly replaced power tool components. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power. A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.

Your Price

$5.95

Circular Saw Terminal

PartSelect Number PS10171809

Manufacturer Part Number 395716-00

This item is sold individually and is made of metal. The terminal attaches to the cord and plug. A set of pliers may be helpful when replacing this part. This part may become bent or broken and will need to be replaced. It is a DeWALT replacement part directly sourced from the manufacturer for use in angle grinders and saws.

Your Price

$5.95

Circular Saw Allen Wrench

PartSelect Number PS10182527

Manufacturer Part Number 624736-00

This is an authentic replacement part manufactured for use with circular saws and pole pruners. The special allen wrench is commonly used to tighten and loosen the blade bolt on circular saws. This allen wrench is sold as an individual replacement part, please see model diagram for associative parts.

Top Brands

Top Product Types

Popular Circular Saw Parts

Circular Saw Brands

Popular Circular Saw Models

Circular Saw Parts

Find Your Part

Popular Circular Saw Parts

Circular Saw Brands

Popular Circular Saw Models