EK6101 Makita Circular Saw - Overview

This is an authentic Makita replacement part manufactured for use with angle grinders and circular saws. The sealed bearing is used to reduce friction between a rotating shaft and fixed housing or assembly. This bearing is often used to allow the spindle to rotate inside the gear box, but may have other uses. Please see model diagram for part location and usage. This bearing is sold individually.

This spring washer is an OEM part that is designed to fit your chainsaw perfectly. The spring washer is a thin plate with a hole in the middle. It is located underneath the nut that secures the flywheel. The purpose of the washer is to evenly distribute the weight of the bolt that is fastened to it. The spring washer is an important part ...Read morebecause it prevents fastening and loosening as the chainsaw vibrates. If this part is warped or damaged in any way, it should be replaced.

This is an authentic Makita replacement part manufactured for use with power cutter saws. This metal spring is used within the recoil starter assembly. It is used to provide tension to retract the starter rope after it has been pulled to start the saw. The rewind spring goes through wear every time the saw is started and can become bent i...Read moref it disconnects from the starter pulley. The rewind spring is available as an individual part.

It is a genuine item that is supplied by the original equipment manufacturer for use with Makita power cutters and chain saws. The radial ring attaches to the crankcase. A screwdriver might be necessary during the installation of this part. This item is made out of metal and will need to be replaced if it breaks. Keep in mind this high-quality part is sold individually.

This authentic OEM item is made for use with Makita power cutters and chainsaws. It is one of the special screws utilized to secure components together. This is an identical replacement for a faulty or a missing hardware that was installed on a new reel. To ensure the exact location and the correct application of this part check the diagr...Read moreams for your model. One durable metal screw is included. A small screwdriver will be needed to secure or remove it.