Jig Saw Parts

Popular Jig Saw Parts

Your Price
$5.95
  Special Order
Jig Saw Assembly Brush
PartSelect Number PS18693523
Manufacturer Part Number 290069406
Genuine Ridgid replacement part, this item is sold individually. 2 of these Brushes are needed for a set. This Brush includes the Brush, Brush Holder, Brush Spring and plug in terminal. It is always best to replace both brushes, even if only one is worn. Worn brushes frequently are the cause behind a motor running poorly. Replacing brushes can fix a motor that's operating intermittently. New brushes can restore a motor's electric braking. Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.
Your Price
$7.44
  In Stock
Jig Saw Stop Ring
PartSelect Number PS10156020
Manufacturer Part Number 961018-5
Genuine Makita replacement part this item is sold individually. E-rings are mostly used to keep a part in place and keep it from moving. This part is used in various areas of the different models of tools shown below.
Your Price
$13.96
  Special Order
Jig Saw Magnet Sleeve
PartSelect Number PS10154008
Manufacturer Part Number 688117-5
This part is available as an individual replacement part. The magnet sleeve goes between the stop ring and the wave washer. It is made of plastic and will require replacing if it becomes broken. A screwdriver may be needed when replacing the sleeve. This genuine item is supplied by the original equipment manufacturer for use with Makita sanders, grinders, trimmers, and jigsaws.
Your Price
$7.44
  Special Order
Jig Saw Hex. Socket Head Bolt M3x10
PartSelect Number PS10145427
Manufacturer Part Number 266177-3
This is an authentic Makita replacement part, sourced from the original manufacturer for use with jigsaws and impact wrenches. The hex socket head bolt is used with different types of tools and the application of the bolt can vary based on the model of the equipment. This bolt is available as an individual replacement part.
Your Price
$55.23
  Special Order
Jig Saw Switch
PartSelect Number PS10153680
Manufacturer Part Number 651922-3
This replacement switch is specially made for use on Makita power tools. Switches are a commonly replaced item in power tools. They play a key role by controlling on/off function of a tool. Because switches use mechanical internals, they will degrade and wear out over time, eventually requiring replacement. To replace this switch you would need a screwdriver. • First make sure the tools is not plugged in • Remove housing screws • Disconnect wires from the old switch • Remove it from the housing • Place the new switch in the housing • Reconnect wires to it • Reassemble and test the unit
Your Price
$36.96
  Special Order
Jig Saw Switch Sgel215c
PartSelect Number PS10153585
Manufacturer Part Number 651225-5
This is a Trigger switch that has 4 leads and a locking mechanism for the trigger. This authentic Makita replacement part is sold individually. Switches are commonly replaced parts in power tools, handling all on/off and variable speed operations. They also have a role in electric breaking; they can momentarily reverse electrical polarity. Because switches use mechanical internals, they will degrade and wear out over time, eventually requiring replacement. Some common signs of a broken or failing switch are: • The tool will not start when you use the switch, or it requires multiple tries to turn on, until eventually it refuses to start at all. • The variable speed function and electric braking aren't working properly.
Your Price
$5.95
  Special Order
Jig Saw Collet 1/4 Inch
PartSelect Number PS16755887
Manufacturer Part Number 690045003
This genuine component is supplied directly from the original equipment manufacturer for use with Ryobi power tools. The collet allows a user to secure a bit. Note, it is for using bits with 1/4
Your Price
$78.59
  Special Order
Jig Saw Base
PartSelect Number PS10146913
Manufacturer Part Number 317565-8
The metal base assembly is an authentic OEM sourced part that is intended to be used with jigsaws from Makita. The base is one of the saw's main components and is used to support the motor and gearcase and to provide a stable platform for the saw. This item is priced as a single part, please note the base plate is a separate part.
Your Price
$33.43
  Special Order
Jig Saw Switch St115a-40
PartSelect Number PS10153619
Manufacturer Part Number 651418-4
It is a high-quality item that is supplied directly from the original equipment manufacturer for use with Makita power tools. This is an authentic replacement for a damaged or missing switch which allows a user to turn the unit on and off, over time components tend to wear out and begin to fail eventually requiring a replacement. Keep in mind this durable plastic body switch is sold individually.
Your Price
$45.66
  Special Order
Jig Saw Switch Tg73bd
PartSelect Number PS10153696
Manufacturer Part Number 651976-0
This is a genuine OEM sourced replacement part commonly utilized on Makita saws. The purpose of this component is to allow a user to control the on/off function of the tool, over time parts may wear out and begin to fail eventually requiring a replacement. It is a high-quality switch which has a durable plastic body and is sold individually.

Jig Saw Brands

Popular Jig Saw Models

Below are the most popular Jig Saw models we have. Enter your model number in the search box to find your model.