Ryobi Parts

Find Your Part

Model number locator Need help finding your model number?
  • Search your model number to find:
  • Genuine OEM parts guaranteed to fit
  • Free manuals and guides
  • Repair instructions and videos
Ryobi Appliance Parts
Original Equipment Manufacturer

Why Genuine OEM Matters
Shop By Part Type

Popular Ryobi Parts

Your Price
$5.95
  In Stock
Ryobi Cap
PartSelect Number PS12657384
Manufacturer Part Number 522994001
This spool cap is for line trimmers. Spool cap covers the bottom of the line spool and prevents the spool from falling out of the spool housing.
Your Price
$10.95
  On Order
Ryobi 5 Disc Assembly W/ H&l
PartSelect Number PS18693700
Manufacturer Part Number 300527002
It is a genuine OEM sourced 5-inch sanding pad assembly that is specially designed for use with Craftsman orbital sanders. Its purpose is to provide support for hook and loop sandpaper, unfortunately, over time it may wear out or get damaged eventually requiring a replacement. To make the pad last longer do not put to much pressure on the sander when using it, the pressure will create heat and ruin the small hooks on the pad. To replace the pad simply remove the four screws attaching it to the sander and replace it with the new pad. Please note this high-quality component is sold individually.
Your Price
$16.95
  Special Order
Ryobi Housing Assembly (inc. Key Nos
PartSelect Number PS16305320
Manufacturer Part Number 203032002
Your Price
$6.95
  Special Order
Ryobi Fan Blade
PartSelect Number PS18785829
Manufacturer Part Number 529437004
This authentic OEM fan blade, also known as an impeller or fan wheel, is found within the blower housing. Located near the tail cone assembly and the motor, it creates airflow by spinning rapidly and then expelling it through the nozzle to move leaves and debris. This green replacement fan, with an insert nut, is specifically designed to replace the existing orange fan in your blower. It is made of plastic and should be replaced if it shows signs of cracks, chips, or missing sections. If you notice a decrease in power, it could be an indication of a faulty fan. To replace the blade, gather a screwdriver, pliers, and a T15 driver or bit. Refer to your user guide for detailed instructions. Generally, you will need to remove the screws holding the inlet guard and blower outlet housing, detach them, locate and access the rear shaft of the motor, hold the shaft with pliers, and thread off the old fan assembly. When installing the new assembly, make sure to continue holding the shaft securely while threading it on.
Your Price
$11.95
  Special Order
Ryobi Hook And Loop Backing Pad
PartSelect Number PS10075791
Manufacturer Part Number 030157001018
This sander pad is compatible with the Ryobi random orbit sander listed below. It is genuine Ryobi replacement part. The pad features a durable foam body attached to a hard plastic backing plate. It is a five inch diameter pad with a hook-and-loop style underside for use with Hook and Loop type sandpaper. This pad has eight vacuum holes. Hook and Loop sandpaper has become very popular over the past few years, because of the ease of changing sandpaper grits when needed.
Your Price
$14.95
  Special Order
Ryobi Blade
PartSelect Number PS16395036
Manufacturer Part Number 682162001
This is an authentic replacement part manufactured for use with Ryobi electric lawnmowers. Lawnmower blades wear out over time and will need to be replaced. This lawnmower blade is sold as an individual replacement part.
Your Price
$19.95
  Special Order
Ryobi Lower Guard Assembly
PartSelect Number PS11855638
Manufacturer Part Number 080016005704
This is an authentic manufacturer-sourced replacement lower guard assembly which is specially designed for use with Ryobi compound miter saws. This part helps to direct dust and trimmings away from the user as well as provide protection from the blade while operating the equipment. It is a high-quality component which is made of durable clear plastic with a metal link-arm and it is sold individually.
Your Price
$7.95
  Special Order
Ryobi Carbon Brush
PartSelect Number PS10076327
Manufacturer Part Number 0502025007
This is a Genuine Manufacturer Sourced replacement part. This is a Carbon Brush with Lead Wire attached and a Spring. This Brush is Sold Individually. Please note Brush Holder is Sold Separately. Carbon motor brushes are one of the most commonly replaced power tool components. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. It is recommended to replace both brushes at the same time. You would need a Screwdriver and Pliers to complete this job.
Your Price
$5.95
  Special Order
Ryobi Compression Spring
PartSelect Number PS18788656
Manufacturer Part Number 679034001
This is a Genuine OEM replacement part used on some String Trimmers/Edgers. This is a Metal Spring and it is Sold Individually. Over time springs may loose its tension and may not function as intended. If this part is lost or damaged it must be replaced.
Your Price
$5.95
  Special Order
Ryobi Brush
PartSelect Number PS16235992
Manufacturer Part Number 089006017092
This is an OEM replacement part, sold individually. • Worn brushes frequently are the cause behind a motor running poorly. • Replacing brushes can fix a motor that's operating intermittently. • New brushes can restore a motor's electric braking. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. This brush is compatible with the tools shown below.

Related Ryobi Parts