Sander Polisher Parts

It is a genuine OEM sourced 5-inch sanding pad assembly that is specially designed for use with Craftsman orbital sanders. Its purpose is to provide support for hook and loop sandpaper, unfortunately, over time it may wear out or get damaged eventually requiring a replacement. To make the pad last longer do not put to much pressure on the sander when using it, the pressure will create heat and ruin the small hooks on the pad. To replace the pad simply remove the four screws attaching it to the sander and replace it with the new pad. Please note this high-quality component is sold individually.

Genuine Makita replacement part, this part is sold individually. This is the dust nozzle for the Makita Belt Sanders listed below. The Dust Bag part number 122562-9 attaches to it. It does not include the part number 213415-4 O-Ring which secures the Nozzle into the housing.

Length 8 Foot Length: 6' Gauge: 18 Wires: 2 Type: Bare Wire This power supply cord is a genuine OEM sourced replacement part. It is specially made to supply power from a standard outlet to Makita power tools. A cracked or damaged cord should be replaced before continuing to use the tool. This rubber insulated cord is sold individually. It comes with a rubber sleeve grommet that is not sold separately. Replacing this power supply cord you will need a screwdriver. • Remove the housing screws • Remove the the housing • Disconnect the old cord wires • Remove the old power cord • Secure the new cord in place • Connect the wires • Reassemble and test the new cord

This Rocker switch has 2 terminals and a compact design for easy installation. This genuine DeWalt replacement part is sold individually. rnrnSwitches are commonly replaced parts in power tools. A switch handles on/off and variable speed functions. They also have a role in electric breaking; they can momentarily reverse electrical polarity. Because switches use mechanical internals, they will degrade and wear out over time, eventually requiring replacement. Some common signs of a broken or failing switch are:rn • The tool has completely stopped functioning - it will not turn on.rn • The tool operates intermittently, requiring multiple tries to turn on, until eventually it won't turn on at all.rn • The variable speed function and electric braking aren't working properly.

This sander pad is compatible with the Ryobi random orbit sander listed below. It is genuine Ryobi replacement part. The pad features a durable foam body attached to a hard plastic backing plate. It is a five inch diameter pad with a hook-and-loop style underside for use with Hook and Loop type sandpaper. This pad has eight vacuum holes. Hook and Loop sandpaper has become very popular over the past few years, because of the ease of changing sandpaper grits when needed.

This dust bag assembly is a reliable replacement part designed to fit a variety of sanders. It includes a fabric dust collection bag and a plastic cap, measuring approximately 5.5 inches in length and 2.5 inches in diameter. The bag efficiently captures dust and debris generated during sanding, helping to maintain a cleaner, safer workspace. Over time, the bag may wear out or tear, leading to dust buildup, reduced visibility, and potential health risks. Replacing it is quick and easy—no special tools required. Simply detach the old bag, clean the mounting area, and attach the new one to restore effective dust collection.

This is a Genuine Manufacturer Sourced replacement part designed for use with Makita Belt Sander. It is Made out of Metal and it is Sold Individually. Due to constant contact, pressure and vibration this part should be inspected periodically and replaced if showing signs of wear to ensure optimum performance. When replacing Steel Plate it is advised to inspect the Cork Plate and replace it if it shows signs of wear. To replace this part you will need a Screwdriver. • Unscrew the Steel Plate that is being held by Three (3) Pan Head Screws. • Once it is removed simply replace it with the new one • Reattach it using the same Three (3) screws. Please note Cork Plate and Screws are Sold Separately.

This is a genuine Makita replacement part, it is sold individually. It has a soft foam pad with a metal backing. It has six vacuum holes for use with the 166078-4 Dust bag. It is remove by unscrewing four 266020-6 Screws. The sandpaper is held by two clamps on the base assembly.

This is a Genuine Manufacturer Sourced replacement part designed for use with Makita Belt Sander. It is Made out of Cork and Rubber. Includes one (1) plate. Due to constant contact, pressure and vibration this part should be inspected periodically and replaced if showing signs of wear to ensure optimum performance. To replace this part: • Unscrew the Steel Plate that is being held by Three (3) Pan Head Screws. • This will allow you to remove the old Cork/Rubber Plate. • Once it is removed simply place the new one over the Steel Plate. • Reattach it using the same Three (3) screws. Please note Steel Plate and Screws are Sold Separately.

This hook-and-loop sander pad is a direct replacement for many Makita orbital sanders. It is a genuine Makita part, not off-brand. It features a foam body attached to a hard plastic backing plate. It also has a sturdy Velcro style bottom for use with hook-and-loop sandpaper. This pad has eight vacuum holes and is 5" in diameter. This pad is compatible with the Makita sanders listed below.