The drain pump and motor assembly may also be known as the washer drain pump and is a part for your washer. The drain pump helps expel water from the washing machine. The drain pump is activated after...
This valve is used for cold water, bleach dispenser and prewash cycles. It has a standard hose fitting inlet with 2 outlets facing 45 degrees to the right and one outlet facing 45 degrees to the left.
This washer hose with bellows, also known as a dispenser hose, is a genuine OEM replacement part for your washer. Replacing this part can be helpful if your washer is leaking. The dispenser hose conne...
This door boot is for washers.
Door boot forms a seal between the wash tub and the door, preventing leaks.
Unplug the washer before installing this part. Wear work gloves to protect your hands.
This is a replacement detergent dispenser for your washer. It stores the detergent, and then dispenses it into the washer at the appropriate point in the wash cycle. If the detergent dispenser is brok...
This drain hose plug, also known as a hose cap, is a genuine OEM part for your washing machine. This plug caps the drain hose from the pump housing, and helps prevent leaks from your washer. Before be...
This part is the replacement rear tub gasket for your washer. It is made of black plastic and is approximately 3-1/4 inches in diameter. The rear tub gasket forms a watertight seal between the rear tu...
$39.25
In Stock
Questions And Answers for 79641262610
Ask our experts a question about this model and we'll get back to you as soon as possible!
12 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Roberto
March 10, 2020
The washer do not let me select any cycle but "casual" it works fine in casual. If you want to select any other cycle you wont be able to do it.
For model number 79641262610
Hello, Thank you for your question. You will want to check into the Control board- Part #: PS12080435. We hope this helps.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Donette
July 13, 2021
Knocking noise in washer. Bearings and shocks have been replaced for a different reason. All was good for 3 weeks, now this knocking sound when tub is spun manually or in the regular cycle. Knocks whether there are clothes in the tub or not.Is it possible the rotor assembly or stator are causing this noise. i do have a video of the noise if you need to hear.
For model number 79641262610
Hi Donette,
Thank you for your question. If your washer is making a knocking sound and you have already replaced the bearings and the shocks, there are some other parts that you will need to check to see which one is causing the issue. You will need to check the rotor, stator and the pump. We hope this helps! Good luck with the repair!
Kenmore front load washer timer will not advance. After along while (20 minutes) code oe comes on. I have already replaced water drain pump, no help. Timer control board?Thanks for the help,
al
For model number 79641262610
Hi Alfred,
Thank you for your question. The OE error code indicates that the washer has not drained for 10 minutes. If you have replaced the drain pump and the code still appears, the issue is likely a clogged filter or coin trap and you will need clean it. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Jorge
October 14, 2022
Door latch broke off. Do you have that part?
For model number 79641262610
Hi Jorge,
Thank you for your question. If you are referring to the locker hook, the part number listed under your model number for it is PS8752721. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
How common is the failure of the rotor or stator? Do you replace both or one? The drum does not spin but the door is locking and I can hear the stator making noise but the drum does not turn. Any help is appreciated.
Thanks
For model number 79641262610
Hello Raul, thank you for contacting us. The rotor failure problem is a commonly reported issue because its windings are susceptible to burns. We would recommend checking the drain system and making sure the drain pump is good. If drainage is good, replacing the rotor, part number PS3532774, is the most probable solution. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.
Removed the top of the washer by removing the 4 back screws and 2 small brackets. Then I removed the front panel, this was actually the hardest part, 2 screws and 8 tabs that you pop out carefully from the top of the panel. I only disconnected the power button and was able to rest the panel on top of the washer. The rest of the washer came apart quickly just moving down the front of the washer and removing the door, latch, tub gasket, drain cover. Removing the pump was just a mater of disconnecting the drain hoses, and one clip under the drain assembly. 3 screws attach the drain to assembly to the pump and only 2 wires that are clearly marked. Reassembly is just going back through in reverse order of disassenbly. The best thing about this is that it all comes apart with a standard phillips screwdriver.
Pull washer away from wall. Unplug cord and remove drain hose from receptacle. Remove 4 screws holding panel to rear of washer. Squeeze and slide back hose clamps on each end of drain hose and loosen center clamp with screwdriver. Remove old hose. Reinstall new hose in reverse order using existing clamps. Re-install back panel.
Thank you for the very helpful YouTube video. After watching the video, I was able to diagnose the problem, buy the part from your website, and complete the repair. This is my personal machine - I am not a professional repairman.
