This is a suspension rod kit for washing machines. Suspension rods are what make up most of the suspension within your washer and are used to ensure the inner drum does not shake or bang excessively against the washer cabinet. Suspension rods can wear down over time and will eventually no longer work as well as they used to, so if any of the suspension rods in your washing machine are worn out or broken, they will need to be replaced. This suspension rod kit comes with all four approximately 27-inch-long suspension rods you would need, as well as the securing accessory parts. Replacing these suspension rods will require some disassembly of your washing machine, so a screwdriver, wrench, and flat tool with likely be necessary. This suspension rod kit is an OEM part.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Etienne L - August 20, 2024
Verified Purchase
BUY THESE, DON'T GO CHEAP
Long story short : My Whirlpool washer started banging very loudly, so I looked for replacement parts. I found some on Amazon for half the price, installed them, and for 2 weeks, it didn't bang. Then, the banging started again quickly. I thought the problem was the transmission bearings, so I bought a new transmission, but that didn’t work. I then replaced the stator motor, which also didn’t solve the problem. After spending $650, I came back here to buy the original suspension, which cost $50 more, and the washer stopped banging. It’s been 2 months, and I haven’t had any issues. The quality part bought here fixed the problem—forget Amazon!
★★★★★
★★★★★
Olivier D - August 2, 2024
Verified Purchase
Replace suspension
Up to now, it perfect repair. Hope it will last longer than the original.
★★★★★
★★★★★
Stefano F - September 27, 2023
Verified Purchase
Easy repair works like new very good quality parts
Very good part and service my washer works like a new one
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.3 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Replaced the suspension springs
The video was excellent in what needed to be accomplished. However it showed reaching inside the tub with vise grips to grab the old spring. This worked fine for removing them but the installation of the new spring did not allow my hand and vise grip to secure the new spring and pull it up and insert it into the retainer. I found that by taking a cord and putting it through the socket and retainer allowed me to pull straight up and seat it in the retainer a lot easier.
Other Parts Used:
Dave from EUSTIS, FL
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Rene
August 27, 2022
The suspension it will fix my ofb code in my washer whirlpool WTW7500GC2
For model number WTW7500GC2
Hello Rene, thank you for your inquiry. The OFB code means your washer is off balance. Some tips are: 1)redistribute the load, close the lid, and press START/PAUSE to resume the cycle, 2) Adding wet items to washer or adding more water, 3) Load items in loose heaps evenly around the wash plate. Also, please ensure that all four legs should are in firm contact with a solid floor. If it is so off balance that it bangs or shakes, then you can check the PS12347544. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
1 person found this helpful.
Was this helpful?
Thank you for voting!
James
September 14, 2023
My washer keep doing code for off balance with one towel in it so I think it been new balancers don't u think
For model number Wtw7500gc2
Hi James, thank you for your question! Make sure the load items are in loose heaps evenly around the wash plate. Also, please ensure that all four legs are in firm contact with a solid floor. If it is so off balance that it bangs or shakes, then you will need to replace the suspension rod kit, part number PS12347544. We hope this solves your problem!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS12347544
Manufacturer Part Number: W11130359
