This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This po...
If your washer isn’t cleaning clothes like it used to or making strange noises, the washplate might be the problem. This part sits at the bottom of the tub and helps move clothes through the water for...
This is a replacement lid hinge for your washer. It is approximately 2.5 inches in length and 1.5 inches in width. The lid hinge is what the lid for your washer pivots on. If the lid hinge is damaged,...
Are you dealing with a faulty washplate in your washing machine? Meet the Whirlpool Washer Washplate Screw, your personal helper for securing loose or broken washplates. This genuine OEM part is highl...
This lid lock assembly is designed for use in various top-load washing machines and serves as a critical safety feature. Located beneath the washer lid, it includes the locking mechanism and wiring ha...
If your washer isn’t spinning, agitating, or cleaning clothes like it used to, the gearcase might be the issue. This part powers the agitator and spin basket, helping your machine run smoothly. It fit...
This clamp helps to prevent leaking by holding the end of water hose in place.
$14.37
In Stock
Questions And Answers for WTW7000DW0
Ask our experts a question about this model and we'll get back to you as soon as possible!
17 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Josephine
January 12, 2020
How might i able to turn off and start machine ? And also stop beeping sound with a fs and e3 code writing?
For model number WTW7000DW0
Hi Josephine, thank you for your question. The F5 E3 error code means the lid lock will not unlock or the lock assembly has failed. What you can do is unplug the appliance from the wall for about ten minutes. If the error persists then you may want to look at your lid lock for being the issue. Good luck with your repair.
6 peoplefound this helpful.
Was this helpful?
Thank you for voting!
Thomas
December 5, 2019
Just had repairman; when left scope read error e1 f3. What is the error referring to ?
For model number WTW7000DW0
Hello Thomas, thank you for inquiring. The F3 E1 code is indicating that the washer cannot detect the water level. First, check the wiring associated with the Electronic Control. If it checks out okay, then you have a faulty Electronic Control, part number PS11723057 for your model washer. Good luck with your repair!
2 peoplefound this helpful.
Was this helpful?
Thank you for voting!
Richard
December 20, 2019
Can the tub bearings be replaced on this model?
For model number WTW7000DW0
Hi Richard, thank you for your question. The part you are requesting on has been discontinued and we have no known replacement listed in our system. We have no further information. You are welcome to contact the manufacturer of the part to see if they have recently released a new substitute. We hope that helps. Good luck with your repair.
1 personfound this helpful.
Was this helpful?
Thank you for voting!
Domi
May 28, 2023
The machine makes a real loud grinding noise when it is on the washing cycle. I'm afraid to continue using it. Sounds like it might be a big problem.
For model number WTW7000DW0
Hello Domi, thank you for the question. If the washer is making a loud grinding noise, it is due to an unbalanced load, and the washer is not leveled. You may need to level the washer by adjusting the leveling legs and evenly distributing the load. If the issue still occurs, you may need to check the gearcase, part number PS12741641, to fix the issue. We hope this helps!
Hello Todd, thank you for your question. We advise checking several parts. The drive pulley is the first thing to check. There is a belt that wraps around the drive motor and pulley to spin the washer tub. Inspect this belt for signs of damage, accumulated dirt, and general wear and tear. I hope this helps.
1 personfound this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
1.) disconnect power to your washer. Turn off water supply and disconnect from the washer.
open the washer top and remove plastic cap from the wash plate
2.) using 7/16 socket, remove bolt from the wash plate. If you can't remove it with a socket , I recommend using impact wrench.
3.) remove wash plate ( you might need to spray penetrating oil or wd40 inside the bolt hole to loosen it. Check to make sure the wash plate gear grooves are not worn down, if they are, replace it.
4.) using your Maytag specific spaner nut wrench, remove the spaner nut from the shaft of the gear case. This should be right underneath where the wash plate was. If you can't turn it by hand , use a rubber mallet or hammer to encourage it.
5.) some people remove the wash basket at this point. I don't think it is necessary.
6.) close your washing machine. Tape the top closed to keep it from flying open. Tilt your washer back and prop it up where you have access to the underside of the washing machine.
7) remove motor rotor bolt and pull rotor off of the motor.
8.) disconnect the two wire connectors that supply power to motor. using a socket, remove bolts that are keeping motor attached to the gear case.
9.) Now that the gear case is all the is remaining on the underside, you can remove the 4 bolts that are holding the gear case to the washer. Now try to pull gear case out.
10.) if gearcase will not pull out, lower washer back to upright position. Spray penetrating oil or wd40 around the shaft of the gearcase and allow it to sit for 5-10 minutes. Using a hammer, lightly tap on the shaft of the gearcase and it should now fall out. ( you might have to apply penetrating oil again, or apply more force with the hammer.
11.) reinstall motor to new gearcase. Insert new gear case to the washer. Reinstall bolts and reconnect power supply wires.
12. ReInstall spaner nut inside the washer, reinstall wash plate.
Removed two screws on back of lid to raise top removed tub one bolt and one spanernut pulled tub lowered top reinstalled screws laid washer down to get to bottom of washer unplugged wiring removed four bolts pulled gear box and motor removed motor from gear box installed motor on new gear box reassemble washer
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
