This clutch slider kit is part of the transmission system in select washing machines, helping control the movement and speed of the agitator during wash and spin cycles. The kit includes a clutch band, slider, and lock ring, and allows the machine to start, stop, and shift speeds smoothly. If worn or damaged, it can cause issues like noisy operation, difficulty spinning, or failure to start properly. Replacing the kit restores proper function and helps maintain efficient performance.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Spinning Issues | Will not agitate | Noisy and Marks Left on Clothes | Cycle Not Advancing
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Trisha C - July 20, 2023
Verified Purchase
Super easy repair
Perfect!
★★★★★
★★★★★
GLEN W - June 14, 2024
Verified Purchase
Never used it yet turned out this was not my trouble, so I n8w have a spare...
Part arrived fairly fast
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Popping the breaker
The washer was popping the GFI receptacle..The gear case seal was out. The bearing started to make a noise, and it was leaking.On the stator. It caused it to pop. I ordered the parts. I had two removed the bolt on the agitator.. Remove the gear case and unplug the wires to it from underneath. I then removed the stator. Installed the stander on the new gear case and started to put it back together. I made sure I put some antiseize on it when I put it together. It was a little hard to take it apart.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
30 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Timothy
December 17, 2023
During the wash cycle, I hear a squeak noise come from the drum area. When the drum is at low speed cycle, agitating, the squeak varies in sound. It is definitely a rubber sound squeak, not a metal to metal squeak. I was researching this site to evaluate the assembly and maybe see if it has a belt drive system. Being it’s a direct drive, I’m now looking elsewhere in the parts assembly for a possible solution. If you any more information, please ask.
For model number MVW7230HW0
Hi Timothy, thank you for reaching out. We would recommend replacing the clutch slider gear assembly, part number PS10060062. Good luck with the repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Mike
July 24, 2025
Ive got a clicking noise on my maytag bravo xl, when agitating is the slider kit what i need?
For model number MVWB835DW3
Hi Mike, thank you for the question. The issue could be with the slider kit, part number PS10060062. It is a part of the transmission system which is responsible for controlling the movement of the agitator during the wash and spin cycles. You may need to replace it to fix the issue. We hope this solves your problem!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Keith
January 13, 2024
Agitator does not move. Can hear grinding when it tries to agitate. Drum spins correct during spin cycle. Do I need to replace the slider assembly?
For model number WTW8500DC0
Hello Keith, thank you for contacting us. According to our research, the issue could be with the clutch, part number PS10060062. We would recommend replacing it to solve the problem. Glad to be of help!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Tom
October 19, 2024
in spin cycle sounds like a airplane going to take off
For model number mvwb835dw1
Hello Tom, thank you for your question. Our recommendation is replacing the Gearcase PS12741641 or Slider PS10060062. This drum shaft assembly is for washers. Drum shaft assembly connects the spin basket to the drive motor to spin the basket. The slider kit helps to regulate the speed and direction of the agitator or drum. It allows the machine to start and stop spinning smoothly, as well as change speeds as needed during the wash and spin cycles. We hope this helps.
My washer will spin without issue however when it tries to agitate the washer makes a very loud noise like a grinding alarm sound
For model number MVWB835DW4
Hello Ryan, thank you for reaching out. A loud grinding noise during the agitation cycle in your washer could be caused by several issues. Here are some potential causes and solutions:
1. Loose or Damaged Parts: Check for any loose or damaged parts within the washer, such as the wash plate or agitator. Tighten or replace any parts that are not secure.
2. Foreign Objects: Sometimes, foreign objects like coins or small items can get stuck in the washer drum or pump, causing noise. Inspect the drum and remove any objects that may be causing the issue.
If the issue persists even after checking these steps, then the transmission, part number PS12741641, could be at fault and may need to be replaced. Glad to be of assistance!
Will this stop the grinding noise during agitation mode only
For model number wtw7500gw2
Hi Patty, thank you for reaching out. Yes, the clutch kit, part number PS10060062, you have mentioned can stop the grinding noise during agitation. It is a part of the transmission system in your washer, which is responsible for controlling the movement of the agitator during the wash and spin cycles. The kit helps to regulate the speed and direction of the agitator or drum. You may need to replace it to fix the issue. We hope this solves your problem!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Charles
November 18, 2019
I’m needing the tub bearing #7 but it only shows the slider with is #8 for #7 and 8
For model number MVWB835DW0
Hello Charles, thank you for writing. The Tub Bearing is only included with the Clutch Kit, this Slider part number PS10060062 for your model washer. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Charles
November 21, 2019
I’m looking for the drum bearing. The correct part number don’t come up in the parts diagram
For model number MVWB835DW0
Hi Charles, sadly we could not find the requested part. I recommend contacting the manufacturer and seeing if they could provide you with a part number, and then you are always welcome to check back to see if we carry the part. Hope this helps!
Was this helpful?
Thank you for voting!
Angel
October 1, 2023
My Whirlpool Cabrio (wtw8500dc0) does not agitate correctly, is this the part I need to fix the issue? ( Slider part# ps10060062) oo do I need the (clutch kit part# ps10064562)?
For model number Wtw8500dc0
Hi Angel, thank you for reaching out. According to our research, you may need to replace the slider kit, part number PS10060062, to fix the issue. It spins the basket during the spin cycle. We hope this helps!
Was this helpful?
Thank you for voting!
Munaf
November 28, 2025
my washer does not turn the water on . It stays on the sensing cycle
For model number MVW7232HW0
Hello Munaf, thank you for getting in touch. Check the water inlet valve, part number PS12348013. A faulty water valve will not let water in to the tub. Ensure the hot and cold water hoses are not kinked or blocked. We hope this helps.
This clutch assembly is designed for use in top-load washing machines, where it plays a crucial role in engaging the transmission during both the agitation and spinning cycles. If your washer is experiencing issues such ...
This part helps your washer spin properly so your clothes come out clean and not soaking wet. It works with the motor to turn the drum and keep things running smoothly. If your washer isn’t spinning or making strange noi...
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing helpe...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Drawer or Glides","title":"Drawer or Glides","url":"/Washer-Drawers-and-Glides.htm"},{"position":2,"name":"W10734521","title":"W10734521","url":""}]
