Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST
Product Description
MOTOR Specifications
Having trouble with your washing machine? That's where our Frigidaire Washer Drive Motor comes in. This authentic part gives your machine the boost it needs to function like it's brand new again! Designed to work impeccably, this motor has two jobs. First, it gets your spin basket whirling correctly and second, it drives the agitator or spin basket based on your chosen mode - be it agitation or tumbling. A perfect match for selected Frigidaire washing machines, this part might also be compatible with certain models from Electrolux, White Westinghouse, and Tappan. However, do remember to disconnect your washer from the power source before installing, and always wear gloves for safety. It's worth noting that although many parts might look similar, their sizes and shapes might not always be identical. This emphasizes the importance of getting the right one for your machine. So, turn to our Frigidaire Washer Drive Motor to help your washer return to peak performance. With this part in place, you'll be back to enjoying effortless laundry day in no time. Because a dependable appliance is a happy appliance.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Washer.
This part works with the following products:
Frigidaire, Electrolux, Kenmore, Crosley.
Part# 134638900 replaces these:
AP4368585, 137248100, 7134638900
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Gerrit R - June 5, 2020
Verified Purchase
part was the right one and fit perfectly
it was shipped very carefully witch I appreciated very much.
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Todd
December 4, 2021
I am having a problem where the washer starts, but then just sits. Sometimes it runs through the cycles, other time is doesn't. I did a diag on it and see E59. I did test 9 and the tub and motor turn fine. The resistance on the winding is at the very low end. Should be 4-6 and the were all ~4.5. The tach ohm was only 95 ohms and should be 105-130. I cleared the error and ran 2 loads with no issue. I take it that my motor is on it's last leg? Is 95 a clear sign that the tach is going bad?
For model number FFFW5000QW0
Hello Todd, Thank you for the question. The E59 error code indicates “no tacho signal for at least 3 seconds.” This means that the motor is not signaling to the washer normally and may be caused by failures within the motor, basket or the control board. If the Motor and Basket are good, this would indicate a faulty Control Board not proceeding through the cycles properly. We hope this helps!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS2349252
Manufacturer Part Number: 134638900
Manufacturer Part Number: 134638900
Brand
Model Number
Description
Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST