My Orders
41744130000 Kenmore Washer - Overview
Diagrams for 41744130000
See every part. Know exactly what you need.
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
$28.95
In Stock
Screw
Part #131302800
This is a replacement screw for your washer or dryer. The screw is approximately half an inch in length and is a Phillips-head screw. It screws in from the outside of the drum, into the vane/baffle. The main reason you would replace this screw is if the old screw is missing or damaged. This part is sold individually and is an OEM part sourced directly from the manufacturer.
$29.73
In Stock
Single Shock Mounting Pin
Part #131268300
This washer shock absorber mounting pin is a small but essential fastener that secures the shock absorber to the outer tub of a front-load washing machine. By holding the shock absorber firmly in place, it helps stabilize the tub during wash and spin cycles, reducing excessive vibration, shaking, and movement. Made from durable materials ...Read moreand designed for a precise fit, the pin supports smooth operation and protects other components from stress caused by unbalanced motion. Replacing a worn, broken, or missing mounting pin can help restore proper vibration control, improve washer stability, and prevent noise or damage during operation.
Read less
$120.77
In Stock
Bellow
Part #134616100
This front-load washing machine door boot seal is a flexible rubber component designed to create a watertight barrier between the washer’s door and the inner tub. It plays a critical role in preventing water leakage during operation, reducing noise and vibration, and allowing the drum to move freely during spin cycles. Measuring approxima...Read moretely [insert dimensions if known], the seal is typically gray and fits snugly around the door opening. Common signs of wear include visible cracks, tears, or holes, water leaking from the door area, and persistent mold or mildew buildup that may cause unpleasant odors. Installation involves removing the washer’s front panel, securing the seal with retaining bands, and ensuring proper alignment to maintain a tight seal. This part is frequently replaced when the washer fails to retain water or when clothes come out wetter than expected.
Read less
$69.02
In Stock
$142.05
In Stock
Tub to Pump Hose
Part #134639910
Ensure proper drainage and protect your washer from damage with this durable tub-to-pump hose, designed for front-load washing machines. This genuine replacement part carries water from the tub to the drain pump and features a built-in coin trap to catch small objects that may fall from pockets during the wash cycle. Made from sturdy blac...Read morek rubber for long-lasting performance, the hose measures approximately 9.75 inches in length. Installation is simple—unplug the washer, shut off the water supply, and wear gloves for safety before removing the old hose and securing the new one in place.
Read less
$216.84
In Stock
$29.95
In Stock
$52.95
In Stock
$101.90
Special Order
Shock Absorber Kit
Part #5304491700
Reduce vibrations and noise during wash and spin cycles with this shock absorber kit, designed to stabilize the washer tub for smooth, quiet operation. Made from durable plastic and rubber components, this genuine replacement part is ideal for fixing issues such as excessive shaking, loud banging, or the machine moving across the floor. T...Read morehe kit includes two shock absorbers, though some washers may require four in total. Installation requires basic tools and safety gear—follow your appliance’s instructions for proper setup.
Read less
$13.89
In Stock
$130.54
In Stock
Drain Pump - 120V 60Hz
Part #137240800
This genuine OEM drain pump is an essential component for removing water from the washer tub during the drain cycle. Built from durable materials, including impact-resistant plastic and stainless steel components, it ensures reliable performance and prevents leaks. Operating at 120V 60Hz, this pump helps maintain proper drainage and smoot...Read moreh cycle transitions. Common signs of failure include the washer not draining, unusual noises during operation, water leaking from the base, or error codes related to drainage. Installation is straightforward—disconnect power, remove the old pump, and secure the new one in place for optimal functionality.
Read less
$56.73
In Stock
Manuals & Care Guides for 41744130000
Click to downloadInstall
Installation Instructions
(8.39MB)
Manual
Owner's Manuals
(5.01MB)
Specs
Product Specifications Sheet
(0.27MB)
Wiring
Wiring Diagram
(0.27MB)
Common Symptoms of the 41744130000
How this model fails, and the parts that fix it.
Leaking
Fixed by
these parts
these parts
Show All
Will not drain
Fixed by
these parts
these parts
Show All
Water Filling Issues
Fixed by
these parts
these parts
Show All
Lid or door won’t close
Fixed by
these parts
these parts
Show All
Watch our pros, then fix it yourself.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More