Models > EIFLS60JIW0

EIFLS60JIW0 Electrolux Washer - Overview

Sections of the EIFLS60JIW0

[Viewing 5 of 5]

Manuals & Care Guides for EIFLS60JIW0

Click to download
Keep searches simple, eg. "belt" or "pump".
Screw – Part Number: 131302800
Screw
PartSelect #: PS417463
Manufacturer #: 131302800
This is a replacement screw for your washer or dryer. The screw is approximately half an inch in length and is a Phillips-head screw. It screws in from the outside of the drum, into the vane/baffle. T...
$16.48
  In Stock
Single Shock Mounting Pin – Part Number: 131268300
Single Shock Mounting Pin
PartSelect #: PS417323
Manufacturer #: 131268300
$29.93
  In Stock
Bellow – Part Number: 134616100
Bellow
★★★★★
★★★★★
(2)
PartSelect #: PS2342392
Manufacturer #: 134616100
Also known as Door Boot Seal.
$272.18
  In Stock
Door Strike – Part Number: 134937300
Door Strike
★★★★★
★★★★★
(2)
PartSelect #: PS2345126
Manufacturer #: 134937300
$76.89
  In Stock
Tub to Pump Hose – Part Number: 134639910
Tub to Pump Hose
★★★★★
★★★★★
(6)
PartSelect #: PS2378397
Manufacturer #: 134639910
$170.25
  In Stock
SCREW – Part Number: 131168200
SCREW
PartSelect #: PS417085
Manufacturer #: 131168200
Sold individually.
$17.30
  In Stock
Water Inlet Valve – Part Number: 134637810
Water Inlet Valve
★★★★★
★★★★★
(1)
PartSelect #: PS2349248
Manufacturer #: 134637810
This water inlet valve works with washers
$190.85
  In Stock
Shock Absorber Kit – Part Number: 5304491700
Shock Absorber Kit
PartSelect #: PS8689635
Manufacturer #: 5304491700
$91.38
  In Stock
Door Catch Screw – Part Number: 131302901
Door Catch Screw
PartSelect #: PS417465
Manufacturer #: 131302901
Sold individually.
$8.72
  In Stock
Drain Pump - 120V 60Hz – Part Number: 137240800
Drain Pump - 120V 60Hz
★★★★★
★★★★★
(1)
PartSelect #: PS2378516
Manufacturer #: 137240800
$239.99
  In Stock
Drum Baffle – Part Number: 137263600
Drum Baffle
★★★★★
★★★★★
(1)
PartSelect #: PS3418909
Manufacturer #: 137263600
Sold individually. Baffle only.
$63.41
  In Stock
CLAMP – Part Number: 134616300
CLAMP
PartSelect #: PS2349238
Manufacturer #: 134616300
$41.49
  In Stock

Questions And Answers for EIFLS60JIW0

Be the first to ask our experts a question about this model!

Common Symptoms of the EIFLS60JIW0

[Viewing 3 of 3]
Lid or door won’t close
Fixed by
these parts
Fixing Fixing Fixing
Show All
Leaking
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will not drain
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Detergent dispenser drawer would not stay closed
Removed old drawer and replaced it with new one. This is the second drawer assembly I have purchased in 6 months. This piece of junk must be a cash cow for Electrolux. If they would make the small latch out of metal instead of plastic, there would be no problem. But that might cost an additional $ .007 per washer. On the positive side, partselect.com had the part and delivered it promptly.
Parts Used:
DISPENSER DETERGENT
  • Karen from Birchwood, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
43 of 52 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Original bellow had 2 largish holes in the upper left quadrant; random leaking.
Bought new part. #1 Lesson learned: Always inspect the actual part number of the ordered/received part. Verify with number marked on the item somewhere. We did not do this and turned out we reinstalled a slightly smaller bellow (wrong part number received in shipment). We were able to fully install it but it was minutely not laying perfectly around the diameter. So minor we did not notice. We did have great difficulty installing though. Anyway, after 1st test run, bellow already had developed a small hole in bottom right quadrant from rubbing on the drum. Left a bunch of gray powdery debris on the drum too. We did not realize error until that point. Took bellow off again to verify part number on it. It was wrong. That explained why the door was so very tight to close and difficult to open. Other than all that, use the video to do the install. It was free to view and easy to follow.
Parts Used:
Bellow
  • Michelle from Loves Park, IL
  • Difficulty Level:
    Very Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers
14 of 19 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken door latch
First, I went to the PartSelect website and easily found the part at a reasonable price. I ordered it early on a Wednesday afternoon, and gladly spent the extra $25 to ship it overnight. That evening, PartSelect sent me an email stating that the part had shipped that very day, and - mistakenly - I took that literally. FedEx tracking predicted that the part would arrive on Friday, July 5, which made sense because the 4th was a holiday.
But I found out that the part had actually shipped on the 3rd, as the email had informed me. It didn't actually ship until the 4th - up until then, a "shipping label" had been created but it had not shipped. FedEx then revised their arrival date to Monday, 8 July.
That clearly wasn't satisfactory. So I went to my local parts distributor, Dayton Appliance Parts, a fifteen-minute drive from my house, and got the same part for $3 cheaper, plus without the $25 shipping fee that PartSelect had charged me for overnight-shipping-that-isn't-actually-overnight-shipping.
Once I had the part in hand, installation was a breeze. Two screws removed, pulled the striker, replaced the new part and the screws. Less than two minutes.
But no thanks to PartSelect.
Parts Used:
Door Strike
  • Paul from DAYTON, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Screw drivers
6 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!