Admiral Washer Parts | Admiral Washer Repair Parts

Hello!

You're visiting the PartSelect site in Canada.

Would you like to shop on the U.S. site?

Go to U.S. site
Stay on this site

Popular Admiral Washer Parts

Transmission Pulley and Bearing Kit – Part Number: 12002213
Your Price
CAD$78.16
Transmission Pulley and Bearing Kit
(9)
PartSelect Number PS2003651
Manufacturer Part Number 12002213
Also known as Thrust Bearing Kit. This kit includes the pulley, washer, thrust bearing, 2 upper race washers and 1 lower race washer. These parts are NOT available separately - they are ONLY available in this kit. A worn bearing causes slow or no spin.
Fixes these symptoms
Burning smell
Noisy
Pumps but will not spin

See more...
Snubber Ring – Part Number: WP21002026
Your Price
CAD$13.49
Snubber Ring
(15)
PartSelect Number PS11738845
Manufacturer Part Number WP21002026
Fixes these symptoms
Noisy
Pumps but will not spin
Shakes and moves

See more...
Drive Belt - 51 inches long – Part Number: WP21352320
Your Price
CAD$22.33
Drive Belt - 51 inches long
(12)
PartSelect Number PS11738882
Manufacturer Part Number WP21352320
This V-style drive belt is about 51" long and 3/8" wide. This part is made to slip on the motor pulley to bring the basket up to the speed required and this makes the belt encounter wear and tear.
Fixes these symptoms
Burning smell
Leaking
Noisy

See more...
Lid Hinge – Part Number: WP35-2044
Your Price
CAD$12.90
Lid Hinge
(7)
PartSelect Number PS11741780
Manufacturer Part Number WP35-2044
This lid hinge in an inch and a half long and is used for some washing machines. It is all white in color and it is made entirely of plastic.
Fixes these symptoms
Lid or door will not open
Lid or door won’t close
Will Not Start

See more...
Lid Hinge Pin – Part Number: WP35-2045
Your Price
CAD$26.04
Lid Hinge Pin
(5)
PartSelect Number PS11741781
Manufacturer Part Number WP35-2045
This lid hinge pin is just over an inch long. It is all white in color and is made entirely of plastic. Sold individually.
Fixes these symptoms
Lid or door will not open
Lid or door won’t close
Timer will not advance

See more...
Hose Clamp – Part Number: WP596669
Your Price
CAD$9.36
Hose Clamp
PartSelect Number PS11743008
Manufacturer Part Number WP596669
This hose clamp extends from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag brand washing machines.
Fixes these symptoms
Leaking
Will not stop filling with water


Drain Pump with Pulley – Part Number: WP35-6465
Your Price
CAD$97.89
Drain Pump with Pulley
(10)
PartSelect Number PS11741799
Manufacturer Part Number WP35-6465
This pump has 2 ports. This pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period of time.
Fixes these symptoms
Burning smell
Leaking
Noisy

See more...
Touch-Up Paint - White – Part Number: 72017
Your Price
CAD$10.18
Touch-Up Paint - White
(11)
PartSelect Number PS385132
Manufacturer Part Number 72017
18ml
Fixes these symptoms
No Symptoms for this part
Washer Drive Pulley – Part Number: W10721967
Your Price
CAD$68.91
Washer Drive Pulley
(7)
PartSelect Number PS10057144
Manufacturer Part Number W10721967
This is a replacement clutch assembly or cam kit for your washer. The clutch assembly is mounted on the drive shaft on the bottom of your washer. You may need to replace the clutch assembly if the splines on the clutch assembly are stripped and the washer is making noise, or if you are having problems with the wash and spin cycles. You will need to access the bottom of the washer for this repair. It is easiest to if you disconnect your washer from both the water and power source, and lay it on its back. The clutch assembly contains 6 parts, and all are included with the kit. It is also important to change out the entire assembly, rather than individual pieces.
Fixes these symptoms
Burning smell
Noisy
Pumps but will not spin

See more...
Suspension Spring – Part Number: WP63907
Your Price
CAD$6.74
Suspension Spring
(4)
PartSelect Number PS11743345
Manufacturer Part Number WP63907
The suspension spring supports the outer tub and keeps the tub steady during loads that could cause an unbalance. If this part breaks, is worn down or has stretched out and lost its spring, it could cause the load to be off-balance which can lead to excessive shaking, moving, noise, and leaks. For this repair, you will need a 1/4 nut driver, a putty knife, a flat blade screwdriver, and a pair of needle-nose pliers. Disconnect the power supply, fill hoses, and drain hose to give you safe and easy access (have a container nearby for water left in drain hose). This item is sold individually, which is important as you may need to repair multiple springs in your appliance, which carries three suspension springs. As an inexpensive part, we recommend purchasing several at a time, as they can be very useful to have on-hand.
Fixes these symptoms
Leaking
Noisy
Shakes and moves

See more...