This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
The point of the lid switch is for the tub to stop spinning when the washer lid is opened. It is a safety precaution just in case someone decides to stick their hand inside the washer while the tub is spinning.
This washing machine suspension rod kit includes 4 suspension rods, 4 suspension balls, and 4 bushings to stabilize the washer tub and minimize vibrations during operation. If the washer shakes or vib...
If your washer is noisy, spins slowly, or leaves clothes soaking wet, this splutch cam kit might be the fix. It helps your machine switch between washing and spinning by connecting the motor to the ba...
If your washer isn’t spinning or making strange noises, the drive belt might be worn out. This genuine replacement belt connects the motor to the drum, helping it spin and tumble your clothes properly...
If your washer won’t start, spin, or agitate, this shift actuator might be the fix. It helps switch between wash and spin cycles and controls the agitator’s movement. It fits many Whirlpool, Maytag, a...
These parts are the replacement suspension rod supports for your washer. They are made of plastic and are approximately 1 ½ inches in diameter. This package will come with an 8-piece set of suspension...
If your washer isn’t filling properly, keeps running water, or has a leak at the back, the water inlet valve might be the problem. This part controls how much hot and cold water enters the machine and...
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This po...
The drain hose carries used water from the washer to your house drain.
$31.91
In Stock
Questions And Answers for ATW4675YQ0
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Anthony Dill
April 14, 2026
Hit by power surge, some char ing at the control board.
Do you sell control boards?
For model number ATW4675YQ0
Hi Anthony, thank you for contacting us. Yes, the control board for your model is part number PS4704668. We hope that helps!
How do you reset the machine,my started to fill then stops for 10min.Then it trys to agtate then shuts down
For model number ATW4675YQ0
Hello David,
Thank you for your question. In order to reset your washer you will need to unplug the unit or turn off the break for 5 minutes and turning it back on to reset it, if that does not fix the issues, our sources suggest replacing the lid latch assembly under part PS3497627 for your model. We hope this helps.
Can you take out the lid latch lock assembly and the washer still work correctly
For model number ATW4675YQ0
Hello Michael, thank you for your inquiry. Based on our research, we do not recommend to remove the lid latch assembly. It is a safety feature that prevents the washer lid from opening during the wash cycle and spin cycle. If the lid latch assembly is broken or defective, we would recommend replacing it, the part number is PS3497627. Glad to be of assistance!
Hi Joseph, thank you for your inquiry. If your washer shakes during the spin cycle, you will need to replace the suspension rods, part number PS11703290. Inspect the suspension rods for wear and damage. Replace the ones that are worn out or damaged. Glad to be of help!
A detailed Service Technician Service Manual is hidden inside the machine on the front panel. It is hidden by the bleach dispenser input. It gives a list of fault codes and instructions for calibration after repair, resetting fault codes, and a manual test mode for stepping the machine through each mode on command. The Tachometer failed which would not let the machine come up to maximum spin speed. The tachometer is part of the solenoid actuator that shifts the transmission. It is not specifically called out in the manual. Any failure causes the lid lock light to blink which gives the appearance of a lid lock failure
The instructions that came with the part were worthless. Essentially, unplug, put in new part, plug it back in. I spent a considerable amount of time on the internet and finally found a video showing how to open the top. Unlike other models, it is held down by clamps in the back rather than clips in the front. Once finding this information the installation was simple. Remove the clamps and the back of the console, slide the top forward and lift, remove and replace the lock and reassemble. You don't even have to remove the hoses.
