Whirlpool W10721967 - Washer Drive Pulley | PartSelect.ca
Washer Drive Pulley – Part Number: W10721967
( Grid squares measure 1x1 inch )
Washer Drive Pulley – Part Number: W10721967 Washer Drive Pulley – Part Number: W10721967 Washer Drive Pulley – Part Number: W10721967 https://partselectca.azureedge.net/Schematics/Whirlpool/NG68TURJ.gif

Washer Drive Pulley

Your Price

CAD$47.34

PartSelect Number PS10057144
Manufacturer Part Number W10721967
Manufactured by Whirlpool

This is a replacement clutch assembly or cam kit for your washer. The clutch assembly is mounted on the drive shaft on the bottom of your washer. You may need to replace the clutch assembly if the splines on the clutch assembly are stripped and the washer is making noise, or if you are having problems with the wash and spin cycles. You will need to access the bottom of the washer for this repair. It is easiest to if you disconnect your washer from both the water and power source, and lay it on its back. The clutch assembly contains 6 parts, and all are included with the kit. It is also important to change out the entire assembly, rather than individual pieces.

This part works with the following brands: Whirlpool, Maytag, Kenmore, Amana, Crosley, Inglis, Admiral, Roper.

This part works with the following products: Washer, Washer Dryer Combo.

This part fixes the following symptoms: Noisy | Will not agitate | Pumps but will not spin | Spins slowly

Videos For installing this part.

Questions & Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".

Customer Repair Stories

Average Repair Rating: 3.7 / 5.0, 4 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Jerry from WALLA WALLA, WA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers, Socket set
Parts Used:
WPW10006384, W10721967
Noise on bottom of Washer louder as time went on. 1 1/2 years
Well, first investigated and found loose nut on drive clutch. First take off the two screws with nut drive then cover off using a screwdriver blade to snap off the cover. Then socket ratchet to take off the nut on drive clutch. take off belt by slowly rotating the drive gear. two screws that hold the electronics to the upper drive clutch and put aside, so you can snap off the cover for drive clutch on upper part with screwdriver and off the parts come and install whole unit back as took it apart. Line up the new upper clutch so that is position as was before. (Using parts diagram helps a lot as www. partsselect.com has for you or Maytag.com.) Then put the electronic part board back on and the gear and nut. Make sure it is tight by several attempts to make sure it's snugged up good and then slowly roll belt back on the pulley and motor drive. Put your cover guard back on with two screws and done.
47 of 60 people found this instruction helpful.
Was this instruction helpful to you?
David from BLOOMINGTON, IN
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
Parts Used:
W10721967
Noise, grinding sounds. Wash tub stopped turning but motor and cycles kept functioning. Process of elimination, must be the clutch assembly.
Easy, just followed the repair video. Recommend also ordering the drive belt. Bought one locally during my repair.
14 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Beverly from MADISON, IN
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
Parts Used:
W10913953, W10721967, W10528947
Wouldn't spin properly
Replaced the gears that were eaten up, the retainer and the actuated. All parts but the spring are plastic. Did all according to your instructions. Happy to report all went well. Washer is working again.
11 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Joseph from BAKER, FL
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Parts Used:
WPW10006384, W10721967
Loose pulley
Tightened up the pulley as the video showed me that might be the issue.
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Customer Reviews
Average Rating:
5 Reviews
4.8
out of 5
Filter By Rating:
  • 5 Stars
    4
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Stars
    0
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".

Model Cross Reference

Brand
Model Number
Description
Kenmore
11020022010
Washer
Kenmore
11020022011
Washer
Kenmore
11020022012
Washer
Kenmore
11020022014
Washer - WASHER
Kenmore
11020102310
Washer - AUTOMATIC WASHER
Kenmore
11020102311
Washer - AUTOMATIC WASHER
Kenmore
11020112310
Washer - AUTOMATIC WASHER
Kenmore
11020112311
Washer - WASHER
Kenmore
11020222511
Washer - WASHER
Kenmore
11020232710
Washer - WASHER
Kenmore
11021102010
Washer
Kenmore
11021102011
Washer
Kenmore
11021102012
Washer
Kenmore
11021102013
Washer - AUTOMATIC WASHER
Kenmore
11021112010
Washer
Kenmore
11021112011
Washer
Kenmore
11021182010
Washer
Kenmore
11021182011
Washer
Kenmore
11021182012
Washer
Kenmore
11021202010
Washer
Kenmore
11021202011
Washer
Kenmore
11021252110
Washer
Kenmore
11021252111
Washer
Kenmore
11021292010
Washer
Kenmore
11021292011
Washer
Kenmore
11021292012
Washer
Kenmore
11021292013
Washer - AUTOMATIC WASHER
Kenmore
11021302010
Washer
Kenmore
11021302011
Washer
Kenmore
11021302012
Washer - WASHER