61004752 Kenmore Refrigerator - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Ice door tab broke off
The parts just arrived -- wow, I think I've found my favorite parts supplier!!!
Ironically, I had jury rigged a new tab on the ice door by inserting a screw into where the tab snapped off, but it didn't work! As I was taking it apart this time, I realized that the solenoid spring had become unclipped. However, it's nice to have it all back together again and working with new parts!
Thank you -- great packaging, the parts look fantastic, and a great sheet of instructions! I've already repaired my refrigerator (only took about ten minutes) and it's up and running!
Thank you!!
Ironically, I had jury rigged a new tab on the ice door by inserting a screw into where the tab snapped off, but it didn't work! As I was taking it apart this time, I realized that the solenoid spring had become unclipped. However, it's nice to have it all back together again and working with new parts!
Thank you -- great packaging, the parts look fantastic, and a great sheet of instructions! I've already repaired my refrigerator (only took about ten minutes) and it's up and running!
Thank you!!
Parts Used:
-
Jamieson from Spring, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Plastic flapper broke
Replaced flapper, and solenoid per the instructions. It was much easier than I had anticipated. The hardest part was reconnecting the control wire to the front panel. Not much room to get your hands in there, but it finally went together...
Parts Used:
-
Stanley from Houston, TX
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Socket set
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice door wouldn't open
-
Chris from Peoria, IL
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Had to replace Ice Dispenser cover
VERY EASY AND WAS INSTALLED IN NO TIME> Many Thanks J
Parts Used:
-
Jeffrey from Royersford, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Our ice dispensor door was broken
Ordered the Ice Dispenser Solenoid & Door Kit and replaced the broken door and solenoid - easy with the right parts - FMS
Parts Used:
-
Fred from Chesterfield, VA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
ice door broken
Followed instruction provided. Ice door only part required.
Parts Used:
-
Roland from Vallejo, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Flapper from ice dispenser broken
Parts came 2 days after I ordered. Followed the included instructions, removed 4 screws, snapped the new flapper into place, put the screws back and voila - REPAIR COMPLETE!! One of the simplest appliance repairs I could imagine. Thanks Partselect!
Parts Used:
-
Charles from Coatesville, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker chute door broke off
Easy to install and it works fine. Recommend using the instruction manual and it was a breeze
Parts Used:
-
Merle from Houston, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The ice maker door broke
It was not that hard. I am not totally inept, but also not a mechanice or techie. I have discovered that a lot of repair jobs have a video that shows you how to do things, and seeing it done makes a task doable for me.
Parts Used:
-
William from Harlan, IA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
fountain door broke
The repair was easy following the instructions provided with repai kit. pictures were a little blurry but other wise very helpful.
Parts Used:
-
lonnie from savannah, MO
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Socket set
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The door strike was broken on my dispensor
The repair did not work. The new door strike did not embrace the solenoid.
I had the old spring, and it fit exactly. I also ordered a roll pin, but have no clue as what to do with it. Excellent directions came with the door strike, but nothing with the roll pin.
Was hoping the roll pin would connect the door strike to the solenoid, but did not see how that would work.
I had the old spring, and it fit exactly. I also ordered a roll pin, but have no clue as what to do with it. Excellent directions came with the door strike, but nothing with the roll pin.
Was hoping the roll pin would connect the door strike to the solenoid, but did not see how that would work.
Parts Used:
-
Pat from Spring, TX
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door flap of ice dispenser door was broken.
I watched the repair video before I even ordered the part. That helped me determine if I felt I could make the repair. The video was extraordinarily helpful. Can't say enough about it. I even took off the dispenser door to see if I thought I could do it. The part arrived quickly, in just a couple of days. I only needed the door flap but it came with the solenoid which is not uncommon on ordering parts. (I couldn't even find the part on other web sites much less a video on how to repair.) I reviewed the video again. I removed the drip tray and door facing as instructed. When removing the mechanism I did get incur a slight electrical shock. I had not unplugged the refrig. Duh.. Got the mechanism out and inserted the door flap. The solenoid strike bar had come out and I had a slight problem getting that back in but referenced the video and no problem. Put in all back in place. Had to clean out the ice bin some because water had frozen in the bottom. Put it back in, plugged in the refrig and I am back in business! Terrific! The video was the key for me. It gave me confidence with very clear instructions. Bill
Parts Used:
-
Bill from WACO, TX
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water dispenser did not shut off
-
Colin from Katy, TX
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the flapper for the ice dispensor was broken
i removed the front cover of the dispensor, easily put the parts in and put back together , the first tome the flpapper came off as i did not secure properly but it only took a few minutes to resecure and now working fine .
Parts Used:
-
richard from dix hills, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker quit
I went to your site thinking the problem was lack of electronic/elec signal. Wrong! I then was guided to your "ice door repair kit". I only then realized(after viewing the repair video) that ice door SOLENOID failure was far more likely than elec circuitry failure.Since it was inexpensive I ordered the kit......gambling that it would fix it; and it did! On my first try I installed the close-door spring wrong but then reviewed the video and instantly saw my error and corrected it. I also got an elec nibble (shock) once because I hadn't disconnected as the video said to do. Good parts,good information, timely response! "Piece of Cake"! Cheers John Taylor
Parts Used:
-
John from Austin, TX
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers, Screw drivers
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!