61004752 Kenmore Refrigerator - Instructions

I shut the water valve and bled the pressure off by using the water dispenser. Removed the four screws that hold the cardboard backing on the unit. Unplugged the power cord, loosened the metal water supply fitting. Then I removed all three hose fittings and dried the drips with a towel. I pushed the electrical plugs off with a flat blade screw driver. Removed the bracket attachment screw and pulled the double valve out. The new valves came with a push-lock fitting for the plastic hoses so I pushed them into their sockets. Put the new valve in and replaced the attachment screw. Reattached the water supply line and the electrical connectors. I turned the water on and checked for leaks. replaced the cardboard backing, and plugged the power cord back in.

We put all the new parts in that came with this kit including the Solenoid. It was super easy. I have a home warranty which covered the refrigerator ice maker, however, it would have cost me $75 just to bring out a repairman and then it would have taken up my time to be around when he wanted to come out. Buying this part and doing the job ourself cost me less money AND time.

The replacement went very well. Fast shipping, I watched the Video online and followed the simple instructions. Was done in 10 minutes

The home service repair through our utility company checked the refridgerator and then looked for parts. Their conclusion is the part was no longer available and we should "just reach into the icemaker when we want ice until we replace the refridgerator.) The refridgerator is a top of the line model and replacement cost is well over $2,000 so that wasn't a good option. So I checked PartSelect and found the part which I received in 3 days, installed it in a few minutes and we're back in operation!

Ordered solenoid, watched video, replaced solenoid, works great.

Unplugged refrigerator 1st to avoid shocks. Took off the front/outside panel of freezer door at ice/water dispenser (6 screws) and disconnected the single electronics plug-in .Pulled off old rubber covered actuator and replaced with new one. Easy. Would recommend cleaning contacts prior to replacing cover. Works like a charm now! Thx. DB

Very simple. Viewed the video that was linked to the web-page and followed the instructions. Longest part of the process was removing and re-attaching the cover on the back of the refrigerator. The video can do more to describe the repair than my words.

Installation was exactly as demonstrated on the "How To" video your website provided. Glad I came to you folks for parts, and will do so again. Parts arriving in a little less than 2 days from time ordered was a pleasant surprise.

The control board went bad & started spaying water all over the floor, when I open the cover the board was Brunt and the cylinder thar operates the ice door over heated & malted to arm the operates the ice door so that needed to be replaced as well.

After Watching the Video, this Job was very easy. I moved the Refridgerator away from the Wall, disconnected Power, shut-off water shut-off valve, unscrewed Water Line and caught water in a small pan. Loosened up 1 screw and removed valve, unplugged 2 electrical connections and bottom water line. I cut-off an inch of line and reinstalled the valve in reverse order. Plugged Refridgerator back in and instantly had water at Dispensor. Now the ice-cubes are normal size. Thank-you PartSelect.

Removed two screws from face plate then nudged plate up until it cleared the two top screws. Removed three screws holding the actual kit in place. Gently pulled the unit forward and pulled the water tube out from above the kit, then disconnected the wires connecting the unit. At this time the unit is separated from the refrigerator and you can disconnect the solenoid to remove it. The plunger in the solenoid was a little different from the old one as it connects to the insulator flap bar but Partselect has made a good/easy modification for replacement. Before installation I recommend lubricating the plastic actuator switch. Reverse the procedures you used to access the unit. Very easy.

When calling to see what the repair would cost my prices ranged from 250.00 to 175.00 with parts and labor. But I decided to tackle this project myself after watching the installation video. My parts arrived quickly and I watched the video had my repair completed within 30min and saved myself over 100.00 dollars. Thank you PartSelect!! The step by step instructions made this project a breeze.

First of all, I am a woman and I don't have a lot of tools but I do like to try to fix things on my own before shelling out $ for a professional repair. I found and followed their YouTube video to fix the fridge. To begin with (before I even ordered the part) I needed to find out if it could be something other than the actuator pad that needed to be replaced so I took everything apart (pretty easy) and checked to make sure that the 'Limit switch' was clicking and able to be depressed by the tip of the actuator pad (the actuator pads connects with the Limit Switch which activates the ice flow). It did click. So I figured the Limit Switch was not the problem so I put everything back together and ordered the actuator pad. When it arrived I was already a pro at knowing what needed to be done. I had it replaced in about 15 minutes and its working great!! Thank you so much for your videos on You Tube. I wouldn't have known what to do. You saved me a bundle of money!! Blessings to you all. Senior in Indianapolis.

Removed dispenser unit, replaced solenoid and door support, and reassembled. Repair video on website was extremely helpful. Only needed door support but found it was easier to order and install the entire assembly with the new door. Item number PS2003478

Your video made this repair simple. Thanks for the info. Also received my parts on time. Keep up the good job .