Maytag Dryer Parts

Videos!

Your Price

$34.10

Drum Support Roller Kit

★★★★★

51 Reviews

PartSelect Number PS1570070

Manufacturer Part Number 12001541

This drum support roller includes one drum roller and two bearings. Most dryers use two drum rollers, and it is recommended to change both at once.

Fixes these symptoms

Marks left on clothes
Noisy
See more...

Videos!

Your Price

$41.23

Tumbler and Motor Belt

★★★★★

43 Reviews

PartSelect Number PS11757542

Manufacturer Part Number WPY312959

The tumbler and motor belt in your dryer allows the drum to spin during the drying cycle. At 100 inches in length, this dryer drum belt is 3/8 of an inch wide and has five ridges. The belt is black in color and it is made entirely of rubber. If your dryer will not tumble, is noisy during operation, or will not start you may need to replace the belt. To complete this repair, you will need to remove the front panel as well as the drum. You will need a 5/16 nut driver and a stubby Phillips screwdriver to complete the repair. Be sure to disconnect power to the dryer before you begin this repair. During the repair, make sure the belt doesn't fall into the groove in the drum, which will cause it to be too loose. You should be able to access the belt and replace it by removing the front panel and bulkhead.

Fixes these symptoms

Drum Not Spinning
Marks left on clothes
Noisy
See more...

Videos!

Your Price

$10.34

Retaining Ring

★★★★★

3 Reviews

PartSelect Number PS11746909

Manufacturer Part Number WP9703438

This metallic retaining ring is less than an inch in diameter. It is made entirely of metal.

Fixes these symptoms

Noisy
See more...

Videos!

Your Price

$17.00

Roller Support Tri-Ring

★★★★★

3 Reviews

PartSelect Number PS11755850

Manufacturer Part Number WPW10512946

If you notice that your dryer is noisy or will not tumble, you may need to replace the tri ring. This part is triangular, and is less than an inch in size. Tri rings can be found both on the idler pulley shaft, or on the rear drum roller shaft. In either case, you will need to remove the front panel of the dryer and the drum to access the part for repair. Once you have accessed the damaged tri ring, you will simply need to slip it off and replace it with the new one. This part is sold individually. Be sure to disconnect the power source from the dryer before you begin this repair.

Fixes these symptoms

Noisy
See more...

Your Price

$21.77

Multi Rib Belt - 92-1/4"

★★★★★

125 Reviews

PartSelect Number PS346995

Manufacturer Part Number 341241

This dryer drum belt has four ridges, three grooves and is 1/4" wide.

Fixes these symptoms

Drum Not Spinning
Heat stays on after drum has stopped
Noisy
See more...

Videos!

Your Price

$18.62

Front Glide Kit

★★★★★

6 Reviews

PartSelect Number PS1804752

Manufacturer Part Number 306508

This front glide kit comes with a blue plastic glide, a brown cork pad, and two metallic rivets. Two kits are required per appliance. A rivet tool is required for this installation.

Fixes these symptoms

Marks left on clothes
Noisy
See more...

Videos!

Your Price

$67.87

Dryer Repair Kit

★★★★★

106 Reviews

PartSelect Number PS373088

Manufacturer Part Number 4392067

This kit comes with one multi rib belt, four drum support rollers, one idler assembly, nine tri rings and one washer.

Fixes these symptoms

Marks left on clothes
Noisy
See more...

Videos!

Your Price

$28.74

Dryer Drum Support Roller

★★★★★

11 Reviews

PartSelect Number PS11752609

Manufacturer Part Number WPW10314173

This is a drum support roller for a dryer. It is a genuine replacement part. The part includes the drum roller only and does not include the tri-rings. This part is sold separately. Most dryers require two drum rollers. It is recommended to check and replace both drum support rollers at the same time to ensure proper drum rotation and because they often wear at the same rate. The drum support roller holds the drum in the proper position while it spins on the support wheels. If rollers are worn out, they will cause the dryer to be noisy. This repair has been rated as "medium" difficulty by our customers, generally taking between 30 and 60 minutes. Make sure to disconnect the power, gas, vent lines before commencing this repair. You may require a nut driver, pliers, screwdriver, and wrench for this repair.

Fixes these symptoms