This front glide kit comes with a blue plastic glide, a brown cork pad, and two metallic rivets. Two kits are required per appliance. A rivet tool is required for this installation.
At 91-5/8 inches in length, this dryer drum belt from Maytag has five ridges. It is all black in color and is made entirely of rubber. This flat belt is 3/8 of an inch wide.
This is a rectangle shaped lint filter screen used for some gas and electric clothes dryers. The dimensions of this lint filter screen are approximately twelve and a half inches long by seven and thre...
This timer dial skirt is just over three inches in diameter. It is white in color and is made entirely of plastic. This skirt has a gray indicator triangle.
This idler pulley shaft washer is used with many clothes dryers. It is less than an inch long, and it is black in color.
$17.15
In Stock
Questions And Answers for MDE3000AYW
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Lonnie
July 12, 2021
When the dryer is first started, and maybe for one or two minutes, it makes a loud deep squeaking noise and then the noise goes away. What is causing this?
For model number MDE3000AYW
Hello Lonnie, Thank you for the question. We suggest checking for wear to the Drum Support Rollers, Roller Shaft, Front Glides, Dryer Drum Felt Seal and the Idler Pulley Wheel and Bearing. We hope this helps!
Do you sell screws for the Maytag Neptune dryer? I need screws for the
back panel for the pug in outlet.
For model number MDE3000AYW
Hi Marianne, thank you for contacting us. We have researched the model and found that the compatible screw for the rear panel is part number PS11739319. If you require assistance to place an order, please contact customer service!
DRYER DOES NOT ALWAYS START HEATING ON DIFERENCE TIMER SETTINGS. AFTER MISING WITH THE TIMER KNOB IT MIGHT START HEATING AND COTINUING THREW THE CYCLE?
For model number MDE3000AYW
Hello Charles, thank you for reaching out. Based on the description that you have provided, we would recommend checking the timer, part number PS11741062, to fix the issue. We hope this solves your problem!
I need the piece that holds the filter in the front of the door. My filter has gotten torn.
For model number MDE3000AYW
Hello Carolyn, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part #: PS11741075 for the Filter. The parts that the filters slides down into and holds the filter is PartSelect Number PS2035623. We are sorry, we looked up the part and it is listed as No Longer Available/Discontinued. There are no part substitutions listed. Our suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers and contact us back with the updated substitution number. We hope this helps!
first, I unplug the power supply of the dryer then I removed the two screws at the bottom of the dryer then pulled out the front part of the dryer,unplugged the blue & yellow wire for the on/off switch for the door,at the back of the dryer I unscrew the pannel for the belt,disconect the belt,and I unscrew the four screws on both side of the front pannel to remove the front cover of the drum. Once I removed the front cover of the drum I can now remove the drum itself to access the drum support roller. I unscrew the rollers then replace it with the new once. It was an easy job. Thank you.