This front glide kit comes with a blue plastic glide, a brown cork pad, and two metallic rivets. Two kits are required per appliance. A rivet tool is required for this installation.
At 91-5/8 inches in length, this dryer drum belt from Maytag has five ridges. It is all black in color and is made entirely of rubber. This flat belt is 3/8 of an inch wide.
This is a rectangle shaped lint filter screen used for some gas and electric clothes dryers. The dimensions of this lint filter screen are approximately twelve and a half inches long by seven and thre...
This dryer door latch kit comes in two pieces: a door latch, and a door strike. It's used to help hold your door shut to your dryer.
$12.64
In Stock
Questions And Answers for MDE7400AYW
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Al
November 24, 2023
Dryer makes a screaming, squealing sound during operation.
For model number MDE7400AYW
Hi Al, thank you for the question. Based on the description that you have provided, we would recommend checking the drive belt, part number PS11741110. We hope this information helps!
Only works on timed dry. Won't work on any other settings.
For model number MDE7400AYW
Hello and thank you for writing.
Since the dryer heats in the timed cycle but not in the auto cycle, you likely have a problem with the timer PS11741127 on the dryer. We hope this helps. Please contact us anytime if you require further assistance.
Dryer does not come on when you try to use it in any drying mode ,the light is working inside, what part do I need
For model number MDE7400AYW
Hello Thomas, thank you for reaching out. Based on the description that you have provided, we would recommend replacing the door switch, part number PS1964648, to fix the issue. We hope this solves your problem!
The dryer runs for a few minutes then blows the circuit breaker. An electrician told me the problem is with the dryer. What could be causing this problem?
For model number MDE7400AYW
Hello Jane, thank you for reaching out. Based on the description that you have provided, we would recommend checking the power cord for damage. If the issue remains, then you may need to check the heating element, part number PS11757530, to solve the problem. We hope this helps, good luck with this repair!
first, I unplug the power supply of the dryer then I removed the two screws at the bottom of the dryer then pulled out the front part of the dryer,unplugged the blue & yellow wire for the on/off switch for the door,at the back of the dryer I unscrew the pannel for the belt,disconect the belt,and I unscrew the four screws on both side of the front pannel to remove the front cover of the drum. Once I removed the front cover of the drum I can now remove the drum itself to access the drum support roller. I unscrew the rollers then replace it with the new once. It was an easy job. Thank you.