This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
They are all strung with a coiled wire made of a nickel and a chrome alloy. This wire receives, but resists, a controlled electric current and as a result, the wire heats up. The heat produced is used...
This part is the replacement drum support bushing for your dryer. It is made of white plastic and measures approximately 1-3/4 inches by 1/2 inch. The drum support bushing is the part that supports th...
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Brad
March 20, 2020
How do i access the thermostat?
For model number MDE2400AYW
Hello Brad, thank you for your question. There are multiple thermostats listed in the model information.There are two with installation videos that will show you how to access that area. They are listed below. I hope this helps.
It’s working the drummer spinning but not blowing here at all
For model number MDE2400AYW
Hi Julianne,
Thank you for your question. If your dryer is not blowing warm air, there are some parts that you will need to check to see which one is causing the issue. You will need to check the blower wheel, the heating element and the thermostats. We have included a link that you may reference on how to check these parts and some others as well. Once you have determined the part you need, please feel free to call customer service. We are open 7 days a week and anyone will be happy to assist you. We look forward to hearing from you!
I have a maytag centennial electric dryer TYPE:DWSR-ELE-2406026-FM54, MOD: MEDC400VW0, SER: M00320750
I need a new lint filter, get you tell me the part number for it?
For model number MDE2400AYW
Hi Nancy, thank you for asking. The lint filter, part number PS11741812, fits your model. If you need help placing an order for it, please feel free to give us a call. We look forward to hearing from you!
Don't pay a repair service for this job when you can do it yourself. Pop the two panels off the back of the machine. The top one is where you'll unhook the old heating element. The bottom one (where the exhaust is) is where you'll need to unhook the broken heating element from it's connector. Place the new heating element's wires down through the back of the machine, plug the wires in (note - this is a 3-prong plug and it should only fit one way - the correct way) to the connector, and re-assemble.
Note: make sure that the exhaust pipe is secured back in its base. Getting the bottom panel back on is a little tricky, but you'll get in after a couple tries!
replaced plastic bushing at rear of unit. all you have to do is have acess to the rear of the dryer, no need to open dryer from front or top. squeeking noise stop but wonder how long the plastic part will last!!!! can not beleive that maytag installed such a low quality bushing. no appliance servicemen want to repair unit when noise first occurred. i replaced the $10 part with help moving the stacked unit down from washer. saved $150 service call.
I tried to find this thermostat from shops in the town I live, but I could not. So I ordered it from Partselect. The website is very easy to find this kind of thermostat. I can compare my burned thermostat with the picture in the website. Also it send to me on time. I just plug it in the socket behind the dryer. I took only few minutes to repair.