Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST
Pantry Flip Lid Cover WR32X10666
Fits your GFSS6PKBASS!
$172.03
Special Order
Fits your GFSS6PKBASS!
PartSelect Number
PS2338104
Manufacturer Part Number
WR32X10666
Manufactured by
GE
Product Description
Pantry Flip Lid Cover Specifications
This is the replacement pantry flip lid cover for your refrigerator. It is made of clear and white plastic and is approximately 30 inches in width and 6 inches in length. The pantry flip lid cover is designed to cover the pantry drawer and helps keep items inside the drawer at the correct temperature by providing the proper seal. The main reason to replace the lid cover is if it is cracked or damaged, or if it will not create a seal. This part is sold individually and is and authentic OEM part sourced directly from the manufacturer.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Door won’t open or close
This part works with the following products:
Refrigerator.
This part works with the following products:
General Electric.
Part# WR32X10666 replaces these:
AP4343878, 1464803, WR32X10666, WR13X10539, WR32X10801
Customer Repair Stories
Average Repair Rating: 3.6 / 5.0, 2 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Pantry drawer lid had broken pivot
First, I have to say I live in the next state over, and I recieved the parts the next day. Yeah! OK, I removed the adjacent drawers *and the removable lower storage shelves on the doors for clearance*. Taking out the broken lid is easy. The new one is a tight fit. The right side has a raised pad on the pivot point, but the left one does not. I worked the peg (pivot point) in on the right side and slowly and carefully pushed the stationary plastic left side in slightly(and sprung the lid slightly) to get enough clearance to get in the left peg without breaking the new lid pivot. While doing this, one has to make sure the shelf immediately behind the lid is in place since there are support tabs located on it, and you will have to rework the thing if you don't get them to mate on the installation.
Other Parts Used:
-
James from Painesville, OH
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:15 - 30 mins
47 of 59 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken tab on the cover.
Take top two drawers out and install the flip up cover in it's spot , then use the screw driver and pry it flip cover, into the groove.
Other Parts Used:
-
Kevin from BUFFALO, MN
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS2338104
Manufacturer Part Number: WR32X10666
Manufacturer Part Number: WR32X10666
Brand
Model Number
Description
Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST