Part Location Diagram of WPW10403040 Whirlpool Light Switch Board
See part 6 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.ca

Light Switch Board

$437.49
  In Stock
PartSelect Number PS11754300
Manufacturer Part Number WPW10403040
Manufactured by Whirlpool
Troubleshooting
This part works with the following products:
Microwave.
This part works with the following products:
KitchenAid.
Part# WPW10403040 replaces these:
8206486, W10403040
Back to Top
Customer Repair Stories
 Average Repair Rating: 3.3 / 5.0, 1 reviews. What's this?
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Light and fan buttons not working
The buttons are easy to access. Disconnect the power to the oven then just remove the center grill on top of the microwave then remove the screw attaching the left side grill and remove the grill this will allow access to the upper screw holding the left side panel then open the oven door and use a long slender Torx driver to remove the two screws in the side of the panel then remove the screw holding the left side lamp cover and remove the cover and then remove the left side air intake screen this will allow access to the wiring to the switches and the connector that must be disconnected to allow removal of the side panel, the connector has a small tab that must be depressed to separate the connector, be certain to disconnect the wiring before attempting to remove the side panel as the wiring is too short to allow removal of the side panel while the wiring is connected, after the wiring is disconnected the side panel can be pulled away from the oven it is simply clipped in place and will be removed by pulling it straight toward you after the panel is removed two screws hold the switch circuit board to the side panel, the buttons are part of a fragile plastic tree that is sandwiched between the side panel and the circuit board use care when installing the replacement buttons and circuit board my replacement buttons needed to be reformed by slight hand pressure to make them fit properly. To reassemble just follow the same steps in reverse order. This is a simple operation that can be done in about an hour.
Other Parts Used:
Ice Auger Drive Motor Charcoal Filter Air Filter Button (Stainless Steel)
  • Nathan from OCEANSIDE, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
5 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11754300
Manufacturer Part Number: WPW10403040
Brand
Model Number
Description
KitchenAid
KHHC2090SBL0
Microwave
KitchenAid
KHHC2090SBL1
Microwave
KitchenAid
KHHC2090SBL2
Microwave
KitchenAid
KHHC2090SBL3
Microwave
KitchenAid
KHHC2090SBT0
Microwave
KitchenAid
KHHC2090SBT1
Microwave
KitchenAid
KHHC2090SBT2
Microwave
KitchenAid
KHHC2090SBT3
Microwave
KitchenAid
KHHC2090SSS0
Microwave
KitchenAid
KHHC2090SSS1
Microwave
KitchenAid
KHHC2090SSS2
Microwave
KitchenAid
KHHC2090SSS3
Microwave
KitchenAid
KHHC2090SSS4
Microwave
KitchenAid
KHHC2090SWH0
Microwave
KitchenAid
KHHC2090SWH1
Microwave
KitchenAid
KHHC2090SWH2
Microwave
KitchenAid
KHHC2090SWH3
Microwave
KitchenAid
KHMS2050SBL0
Microwave
KitchenAid
KHMS2050SBL1
Microwave
KitchenAid
KHMS2050SBT0
Microwave
KitchenAid
KHMS2050SBT1
Microwave
KitchenAid
KHMS2050SSS0
Microwave
KitchenAid
KHMS2050SSS1
Microwave
KitchenAid
KHMS2050SSS2
Microwave
KitchenAid
KHMS2050SSS3
Microwave
KitchenAid
KHMS2050SSS4
Microwave
KitchenAid
KHMS2050SWH0
Microwave
KitchenAid
KHMS2050SWH1
Microwave
KitchenAid
YKHMS2050SB0
Microwave
KitchenAid
YKHMS2050SB1
Microwave
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service