This part is a replacement glass cooking tray for your microwave. The cooking tray rotates when the microwave is running, and helps your food cook evenly. As it is made of glass, these glass cooking trays will occasionally crack or break. If your cooking tray is broken it may not rotate, and you will need to replace it. This part is sold ...Read moreindividually, and is approximately 16 inches in diameter. This is an OEM part from the manufacturer.
This door interlock switch is a genuine replacement part designed for use in microwaves. It serves a critical safety function by preventing the microwave from operating when the door is open. Because proper operation of the microwave’s shielding and interlock system is essential for user safety, this part should be installed by a qualifie...Read mored service technician. After installation, the interlock switches and microwave shielding must be thoroughly tested to ensure the appliance meets safety standards.
Also known as the coupler. This driver is located directly under the glass turntable, and over the motor. This part helps the glass turntable to rotate.
This small but important switch helps keep your microwave safe by making sure it won’t run unless the door is properly closed. It tells the microwave’s control system whether the door is open or shut, helping prevent accidents and ensuring everything works as it should. If your microwave isn’t starting or heating, this part might be the f...Read moreix you need. Installing it usually involves opening the microwave’s outer panel and replacing the switch near the door latch—just be sure to unplug the unit first and follow safety steps.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Joel - For model number KHMS2050SSS2
February 15, 2020
How do you remove the door hinge screw?
Hello and thank you for writing.
A damaged hinge on a microwave oven should be repaired before the oven is used again.
Step 1
Shut off the power to the microwave from your home's main circuit breaker box. Push the breaker switch that supplies the electricity to the appliance to the "Off" position for the duration of your repairs.
Step 2
Remove the screws securing the air grille above the microwave door; the type and number of screws vary by brand and model. Pull the grille off of the front of the appliance and set it aside.
Step 3
Open the microwave door. Remove the hinge pin or screw holding the door assembly to the top hinge. Lift the door assembly up and off of the bottom hinge. Place the removed door face down on a padded surface.
Step 4
Clean the hinge areas with a sponge and warm, soapy water to remove any grime or food particles. Dry the hinges with a soft cloth. A buildup of food or grime on the hinges may prevent them from opening and closing properly.
Step 5
Try gently wiggling the door hinges. Tighten the hinge screws along the top and bottom edges of the microwave cabinet if you felt the hinges move.
Step 6
Replace the door hinges if they are bent or broken. Remove the hinge screws from the top and bottom edges of the microwave cabinet. Keep the removed screws, but discard the old hinges. Line up the screw holes on the cabinet with the mounting screw holes on the replacement hinges. Reinsert and tighten the removed screws.
Step 7
Reverse the disassembly process to replace the microwave door. Flip the breaker switch back to the "On" position to restore the electrical supply.
We hope this helps. Please contact us anytime if you require further assistance.
2 peoplefound this instruction helpful.
Was this helpful?
Thank you for voting!
Lynne - For model number KHMS2050SSS2
October 14, 2021
I see you have the complete door replacement available for model khms2050sss2 (p/n ps2372960). Your model number has an extra "s" in it compared to the model number I have on my microwave. Is this door still compatible with my model number? Thank you..
Hello Lynne, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS2372960. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
The door handle is broken and must be replaced. Must the door be removed and taken apart to replace the handle? Please provide steps.
Hello Bob, thank you for asking. We have a testimonial on our site from a customer that had installed it. He says: Unscrewed 3 screws on side of door and two on the bottom. Slowly pry apart outside frame from black inside facing door. Separate pieces carefully. You won’t have to completely remove outside door cover if you have a short driver for the two Torx screws holding the handle on. Replace and carefully put back together. Tip: do not over screw the screws, back in, it will easily crack the old plastic. We hope this helps.
Was this helpful?
Thank you for voting!
Prev
1
Next
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Glass cooking tray broke
37 of 53 peoplefound this instruction helpful.
Mark from Agua Dulce, CA
Really Easy
Less than 15 mins
There was no "fixing" per say but we still could not use the microwave without the plate. This has to be one of the biggest plates for a microwave. We ordered this through your company and we had it three days later. THREE DAYS! We had expected anywhere from 1-2 weeks. My husband was so impressed he bookmarked your site for future re
... Read moreference. Thank you for being so efficient and prompt. The glass turntable fit like a glove! Sincerely, Mark and Lia Hammond
Read less
Was this helpful?
Thank you for voting!
Fire in microwave melted several parts
41 of 83 peoplefound this instruction helpful.
duane from san diego, CA
Easy
15 - 30 mins
Remove the filters and use a Torx driver to remove two screws holding the motor. The wires on on the motor are held in place by a plastic clamp that must be pried open on one side. That's all it takes to replace the drive motor. Everything else that makes the turntable spin lifts off from inside the microwave.
Microwave wouldn't turn on and found breaker been tripped and then microwave wouldn't turn on at all.
31 of 55 peoplefound this instruction helpful.
Daniel from DECATUR, GA
Easy
30 - 60 mins
Pliers, Screw drivers
Read some instructions and easily found the fuse. Replaced it. Still didn't work. Took control panel off to check door switches. Nothing I read mentioned a second fuse. Tested and it to had blown. Ordered another one. Popped them in. Done.
My Orders
