This part is a replacement glass cooking tray for your microwave. The cooking tray rotates when the microwave is running, and helps your food cook evenly. As it is made of glass, these glass cooking t...
$93.51
In Stock
Order within the next 9 hrs and your part ships today!
This door interlock switch is a genuine replacement part designed for use in microwaves. It serves a critical safety function by preventing the microwave from operating when the door is open. Because ...
$42.70
In Stock
Order within the next 9 hrs and your part ships today!
Also known as the coupler. This driver is located directly under the glass turntable, and over the motor. This part helps the glass turntable to rotate.
$42.69
In Stock
Order within the next 9 hrs and your part ships today!
This small but important switch helps keep your microwave safe by making sure it won’t run unless the door is properly closed. It tells the microwave’s control system whether the door is open or shut,...
$57.15
In Stock
Order within the next 9 hrs and your part ships today!
Order within the next 9 hrs and your part ships today!
Questions And Answers for KHHC2090SSS2
Ask our experts a question about this model and we'll get back to you as soon as possible!
10 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
David Martinez
December 19, 2019
My microwave keeps pushing buttons on its own and randomly stops working. I reset the power and it starts working again but still pushes buttons without anybody touching the screen and sometimes the touch screen does not work. Any recommendations will be greatly appreciated
For model number KHHC2090SSS2
Hello David, thank you for your question. It sounds like a touch pad issue. We would recommend replacing the control panel Part #: PS2352632. I hope this helps!
1 personfound this helpful.
Was this helpful?
Thank you for voting!
Scott
January 22, 2020
I replaced the 12 volt, 10 watt halogen surface light bulbs with 12 volt 2 watt led bulbs (g4 bi-pin equivalent). However, the led’s won’t illuminate by themselves. If i install one halogen bulb on one side then both bulbs (led and halogen) illuminate. Are the 2 watt led’s too low of a power to work? Is there something in the lighting circuitry that requires a minimum amount of current flow to light both led bulbs? Appreciate your help and advice!
For model number KHHC2090SSS2
Hello, Thank you for your question. I would recommend replacing to the correct wattage that is listed for your model. That should be an issue. It could also be the socket where the light goes in. We hope this helps, good luck with this repair.
1 personfound this helpful.
Was this helpful?
Thank you for voting!
Daniel
January 7, 2020
The door indicator beep alarm continues to beep when door is open or closed. What is the problem?
For model number KHHC2090SSS2
Hello Daniel, Thank you for the question. Normally this indicates an issue with one more more of the Door Switches. I suggest testing the switches with a multi meter to check for continuity. We hope this helps!
Microwave not working. Error code f9-q
Touch screen not responsive
Sometimes the microwave will turn on by itself.
For model number KHHC2090SSS2
Hello Walter,
Thank you for your question. You would need to replace the electronic control board under part PS11745310 for your model to fix the issue. Hope this helps!
Hello Mike, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11748457. Hope this helps!
There was no "fixing" per say but we still could not use the microwave without the plate. This has to be one of the biggest plates for a microwave. We ordered this through your company and we had it three days later. THREE DAYS! We had expected anywhere from 1-2 weeks. My husband was so impressed he bookmarked your site for future reference. Thank you for being so efficient and prompt. The glass turntable fit like a glove! Sincerely, Mark and Lia Hammond
Remove the filters and use a Torx driver to remove two screws holding the motor. The wires on on the motor are held in place by a plastic clamp that must be pried open on one side. That's all it takes to replace the drive motor. Everything else that makes the turntable spin lifts off from inside the microwave.
Read some instructions and easily found the fuse. Replaced it. Still didn't work. Took control panel off to check door switches. Nothing I read mentioned a second fuse. Tested and it to had blown. Ordered another one. Popped them in. Done.
