Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST
Product Description
Door Latch and Switch Assembly Specifications
This door lock and switch assembly is a genuine OEM replacement for front-loading washing machines, designed to keep the door securely locked during operation and prevent leaks. It sends an electrical signal to the control board to confirm the door is closed, allowing the wash cycle to start and run safely. Built from durable plastic and metal components, the assembly measures approximately 6" x 4" x 1.75". Replace this part if the door won’t lock, the machine won’t start, or error codes related to door issues appear. Installation involves disconnecting power, removing the door boot seal spring, and unthreading mounting screws to swap the old assembly for the new one.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Lid or door won’t close | Locking Issues
This part works with the following products:
Washer.
This part works with the following products:
Electrolux, Frigidaire.
Part# 134629900 replaces these:
AP4365662, 7134629900
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
DEMETRI M - August 27, 2020
Verified Purchase
Easy repair, worked as expected
The part was in great condition, exactly as the original. Replacement was simple.
Alain B - July 18, 2022
Verified Purchase
Do not work
I replace the broken part with the New one you send me, IT Do not Lock the door. I put back the broken part (old), IT succès to Lock the door. Is it possible the New part Do not work? Alain
August 28, 2022
Thank you for your review. We're sorry to hear that the part did not work, we will be in touch soon to help fix this issue.
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 2 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Electrolux Upright Washer Door Wouldn't Open
Parts took twice as long to arrive shipped from Utah to Houston, Texas. Once arrived parts were straight forward to install.
1) Open the door by tripping the door strike using yard trimmer line.
2) Turned Power off (unplugged unit)
3) Used needle noses pliers to remove door rubber boot retainer
4) Folded right-side of rubber in to removed switch assembly
5) Used Phillips screwdriver to remove switch assembly screws, navigated damaged switch part forward then disconnected line.
6) Connected new switch to line, navigate part back into washer and screwed back in.
7) Repositioned door rubber boot and reattached door boot retainer wire with hands and needle noose pliers.
8) Replaced door strike using Phillips screw driver.
9) Re-plugged washer power to outlet, closed door and ran a test cycle. All good!
1) Open the door by tripping the door strike using yard trimmer line.
2) Turned Power off (unplugged unit)
3) Used needle noses pliers to remove door rubber boot retainer
4) Folded right-side of rubber in to removed switch assembly
5) Used Phillips screwdriver to remove switch assembly screws, navigated damaged switch part forward then disconnected line.
6) Connected new switch to line, navigate part back into washer and screwed back in.
7) Repositioned door rubber boot and reattached door boot retainer wire with hands and needle noose pliers.
8) Replaced door strike using Phillips screw driver.
9) Re-plugged washer power to outlet, closed door and ran a test cycle. All good!
Other Parts Used:
-
Fritz from HOUSTON, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
6 of 9 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door to washing machine would not close properly
I replaced the thingy and the whatsit, turned the machine off, then on, and the door worked properly thereafter.
Other Parts Used:
-
Paul from ROCKLAND, ME
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS2345085
Manufacturer Part Number: 134629900
Manufacturer Part Number: 134629900
Brand
Model Number
Description
Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST