Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST
Washer Analog Water Temperature Control Board WP22003906
Fits your MAV7358AWQ!
$163.31
In Stock
Fits your MAV7358AWQ!
PartSelect Number
PS11739474
Manufacturer Part Number
WP22003906
Manufactured by
Whirlpool
Product Description
Washer Analog Water Temperature Control Board Specifications
This analog water temperature control board is three inches long and almost three inches wide.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
No hot or cold water
This part works with the following products:
Washer.
This part works with the following products:
Maytag.
Part# WP22003906 replaces these:
AP6006400, 22002857, 22003575, 22003906, 22003906R, 6-2601670
Customer Repair Stories
Average Repair Rating: 2.8 / 5.0, 3 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The timer housing is to thin. I broke the tab on the right side installing the timer.
I did what anyone could do, remove the screws and replace the part. The part just came apart during installation. If I were Maytag, I would replace the part free of charge.
Other Parts Used:
-
randy from Dayton, NV
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
10 of 10 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Hot or Warm water worked, but not Cold
Found a website that showed how to open the lid. Lifted the lid and checked the solenoids. When hot was disconnected, got cold only. Multimeter showed hot was being continuously energized regardless of temperature selector switch position. Removed back (5 or 6 screws) and found the circuit diagram. Studied it and determined that the switch or analog card had to be the problem. Took digital pictures of everything to aid in replacing wires pulled for trouble shooting. Pulled temp selector switch (pushed in a couple of tabs). Disassembled switch and checked all contacts. Working fine. Nothing left but the temperature board. Determining correct revision was difficult. Found a website that said, "first numbers of serial are revision number. Pick card with highest revision number lower than your model." Replaced card and everything worked as designed. Every wire was labeled and every wire bayonet was labeled so I didn't need the pictures, but I felt better having them.
Other Parts Used:
-
Paul from Mundelein, IL
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Nutdriver, Screw drivers
10 of 10 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
On cold water setting the water was warm..Hot water was great
Removed 5 screws on back of the control tower.
removed the temperature control board and replaced with new board.
removed the temperature control board and replaced with new board.
Other Parts Used:
-
Charles from Corcoran, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
3 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11739474
Manufacturer Part Number: WP22003906
Manufacturer Part Number: WP22003906
Brand
Model Number
Description
Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST