Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST
Product Description
Water Inlet Valve Specifications
This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Whirlpool Washer Water Inlet Valve
Troubleshooting
This part fixes the following symptoms:
Leaking | Water Filling Issues
This part works with the following products:
Washer.
This part works with the following products:
Whirlpool, Maytag, Kenmore.
Part# W10853723 replaces these:
AP5989759, W10326913, W10326915, W10342320, W10853723VP, WPW10326913, WPW10326915
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Greg W - March 9, 2022
Verified Purchase
Excellent water valve
The part installed easily, fit well and has been working for several weeks flawlessly!
Bruno P - May 18, 2023
Verified Purchase
Exactly what I needed
Other than being a bit expensive of a fix, it was the correct part that worked perfectly
Laurie M - July 6, 2020
Verified Purchase
Part as shown
Part cam with fast shipping and was easy to install
Thomas L - May 16, 2019
Verified Purchase
A ONE
A 1. Fast shipping and part work great. Very satisfied
Darren C - July 23, 2018
Verified Purchase
Right part easy fix
The valve assembly was packaged well and arrived fast. Put the part in and washer no longer floods out of the bleach reservoir. Thanks!
Ray D - April 11, 2021
Verified Purchase
Washing machine water Inlet valve
It was exactly the part that I needed. Fit perfectly and fixed the problem.
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 3.5 / 5.0, 2 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Cold water leaked into tub
Replaced water inlet valve. Parts select video was incorrect for my unit. There are no spring clips to be released using a putty knife. Rather remove the two screws in the back of the top, pull the top forward and up to get at hose connections to the valve. Hint, place a towel under the valve connections because after removed from the valve, the hoses will leak to the floor. I propped the top up with a stick. All the other stuff in the video is good. Unplug and turn water off, remove connectors from old valve etc. . I also removed the protective plate over the cabled that runs between the washer and the control panel located on the back of the washer. The will make the sliding of the top forward easier. Only one screw involved.
Other Parts Used:
-
Benjamin from FLINT HILL, VA
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers
8 of 9 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water streaming from under lid down front of washer
The inlet/diverter valve relacement steps:
1. Turn off electric and water supply and disconnect hoses
2. Remove hold down screws on back of control console
-Remove console to access valve and remove valve hold down screws
3. Label and disconnect valve connections
4. Insert putty knife 3 in. from each front edge to release hold down clips for top panel.
5. Disconnect hoses from valve assembly.
6. Remove old valve and install new.
1. Turn off electric and water supply and disconnect hoses
2. Remove hold down screws on back of control console
-Remove console to access valve and remove valve hold down screws
3. Label and disconnect valve connections
4. Insert putty knife 3 in. from each front edge to release hold down clips for top panel.
5. Disconnect hoses from valve assembly.
6. Remove old valve and install new.
Other Parts Used:
-
Martin from FRONT ROYAL, VA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers, Screw drivers
5 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11731257
Manufacturer Part Number: W10853723
Manufacturer Part Number: W10853723
Brand
Model Number
Description
Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST