This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This kit includes one driver hub and two driven basket hubs. The basket hub is located under the agitator. If your washer is not agitating or spinning properly, the hubs will need to be replaced.
This part makes sure that the lid is shut before allowing the machine to start or agitate.
NOTE: This is a manufacturer substitution. Part may differ in appearance but is a functional equivalent to prior parts including
This rotary position sensor is a genuine OEM part for your washing machine. It helps to ensure the load of clothing stays balanced during the wash cycle. Customers have rated this repair as easy. To c...
This hose clamp extends from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag brand washing machines.
This is a replacement lid hinge for your washer. It is approximately 2.5 inches in length and 1.5 inches in width. The lid hinge is what the lid for your washer pivots on. If the lid hinge is damaged,...
This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.
Ask our experts a question about this model and we'll get back to you as soon as possible!
11 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Linda
February 24, 2022
Water keeps dripping into the tub after the entire cycle is finished. What part will I need? Thank you.
For model number MVWB725BW0
Hello Linda, thank you for writing. If the water inlet valve PS11731257 is defective, it may drip slowly into the tub. We have a video for you to access. We hope to hear from you soon.
Think i need a fabric softer dispenser mine clogs up or how can i clean it?
For model number MVWB725BW0
Hello Linda, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is Fabric Softener Dispenser Part#: WPW10553370.
Hello, Thank you for your question. Looking at your model number this cause will typically be caused from a control board issue. You will need to check into the control boards on the unit and check the wiring/ribbon attachment. We hope this helps.
Was this helpful?
Thank you for voting!
Norris
July 19, 2021
Need to replace top door
For model number MVWB725BW0
Hello Norris, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11748569 for the White Lid and PartSelect Number PS9491850 for the Cosmetallic Lid. We hope this helps!
Maytag Bravos XL lid slams shut instead of slowly closing. How can we fix this?
For model number MVWB725BW0
Hello Kat, thank you for writing. We have a Right side hinge PS11748991 and the left side hinge PS11748992. You may want to change both at the same time. Good luck with your repair.
Removed a cap in the center of the tub basket which has a bolt that needs removed I believe it's a 9/16 after I removed the bolt I then removed the center of the bottom of the basket assembly which then allowed me to get to the basket hub that needed replaced it was a little dirty and I couldn't get it out so I sprayed a little penitrating oil on it let it sit a little then I was able to remove the hub and install the new one then I put it all back together and the washer is working great
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
