This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This kit includes one driver hub and two driven basket hubs. The basket hub is located under the agitator. If your washer is not agitating or spinning properly, the hubs will need to be replaced.
This part makes sure that the lid is shut before allowing the machine to start or agitate.
NOTE: This is a manufacturer substitution. Part may differ in appearance but is a functional equivalent to prior parts including
These parts are the replacement suspension rod supports for your washer. They are made of plastic and are approximately 1 ½ inches in diameter. This package will come with an 8-piece set of suspension...
This rotary position sensor is a genuine OEM part for your washing machine. It helps to ensure the load of clothing stays balanced during the wash cycle. Customers have rated this repair as easy. To c...
This hose clamp extends from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag brand washing machines.
This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.
The suspension rods are used to keep the drum assembly upright. The rods attached to the four corners on top of the cabinet to the base of the drum. When a rod breaks, the drum will be tilted which wi...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
Ask our experts a question about this model and we'll get back to you as soon as possible!
8 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Wayne
January 28, 2020
On this model does the cap on the washplate unscrew or does it just pop off?
For model number MVWB850YG1
Hi Wayne, thank you for your question. We have a general video that shows how parts like your washplate are installed. You can view that here: https://www.youtube.com/watch?v=2slahiXRGow. It will show you how to remove the cap. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Tim
February 22, 2024
I get a alarm “UL “ on my machine aprox 12 minutes before the end of cycle
For model number MVWB850YG1
Hi Tim, thank you for your inquiry. Based on our research, the error code UL indicates that there is an unbalanced load. So, try reducing the load a little and see if it works. If the issue still persists, you may need to replace the suspension rod kit, part number PS3502193, to solve the problem. We hope that helps!
Is it possible to change the washplate for a impeller in my machine ?
For model number MVWB850YG1
Hello and thank you for writing.
Yes, you can replace the wash plate, but you can not exchange a wash plate for an impeller in this model
The wash plate part number: PS11753686 is in the list of compatible items for your model. We hope this helps. Please contact us anytime.
Hello Sam, thank you for contacting us. According to our research, the issue might be with the lid hinge arm, part number PS11756125, or the door hinge, part number PS3504180. We hope this helps, good luck with this repair!
How do I remove the agitator from my washer to clean or remove a coin?
For model number MVWB850YG1
Hi Elaine, thank you for contacting us. To remove the wash plate, part number PS11753686, from your washer, we would suggest following these general instructions: First, pry off the wash plate cap using a flat-head screwdriver. Then, using a socket wrench, take out the central bolt that holds the wash plate. Insert a hook or a metal wire in the holes of the wash plate, and lift it. The wash plate will come off. We hope this information helps!
Removed a cap in the center of the tub basket which has a bolt that needs removed I believe it's a 9/16 after I removed the bolt I then removed the center of the bottom of the basket assembly which then allowed me to get to the basket hub that needed replaced it was a little dirty and I couldn't get it out so I sprayed a little penitrating oil on it let it sit a little then I was able to remove the hub and install the new one then I put it all back together and the washer is working great
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.