This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This kit includes one driver hub and two driven basket hubs. The basket hub is located under the agitator. If your washer is not agitating or spinning properly, the hubs will need to be replaced.
This part makes sure that the lid is shut before allowing the machine to start or agitate.
NOTE: This is a manufacturer substitution. Part may differ in appearance but is a functional equivalent to prior parts including
This rotary position sensor is a genuine OEM part for your washing machine. It helps to ensure the load of clothing stays balanced during the wash cycle. Customers have rated this repair as easy. To c...
This hose clamp extends from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag brand washing machines.
This is a replacement lid hinge for your washer. It is approximately 2.5 inches in length and 1.5 inches in width. The lid hinge is what the lid for your washer pivots on. If the lid hinge is damaged,...
This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.
The suspension rods are used to keep the drum assembly upright. The rods attached to the four corners on top of the cabinet to the base of the drum. When a rod breaks, the drum will be tilted which wi...
$132.59
In Stock
Questions And Answers for MVWB880BW0
Ask our experts a question about this model and we'll get back to you as soon as possible!
6 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Peter
January 25, 2020
Our top loader starts itself with lid up and open and no one is near.
For model number MVWB880BW0
Hello and thank you for writing.
It certainly sounds like it could be a faulty lid lock assembly PS11756782, you should check the part(s) for signs of damage, and replace as necessary. We hope this helps. Please contact us anytime if you require further assistance.
My washer on spin cycle always come up with the code” ul” in which don’t allow clothing to be still full of water.What could be the problem?
For model number MVWB880BW0
Hello Donald,
Thank you for your question. If the load is unbalanced, the washer will display this code while running an imbalanced load correction routine at the end of the wash cycle and before the ?nal spin. Our sources suggest replacing the suspension rod kit under part PS3502193 for your model to fix the load balancing issues. We hope this helps.
During spin cycle it gets loud,kind of like a jet engine.
For model number MVWB880BW0
Hello Curtis, thank you for contacting us. Based on our understanding of the issue, we would suggest checking the tub seal and bearing kit, part number PS3503261, to solve the problem. Glad to be of help!
Gets to the last cycle and leaves cloths soaking wet
For model number MVWB880BW0
Hello Gary, thank you for your question. We would recommend checking the drain pump, PartSelect Number: PS11754363, and drain hoses for any obstructions. This could also be an issue with the lid switch and the basket hubs. If the unit isn't spinning fast enough to dispense the water from the clothes, the lid switch may not be actuating properly, and the basket hubs could be worn, and not allowing it to get into the fast spin. I hope this helps.
What causes water leaks from the bottom but only when washing larger loads, ie bed linen?
For model number MVWB880BW0
Hi James,
Thank you for your question. When you overload your washer with a heavy item such as a comforter or bed linen, the washer will leak. The water will slosh over the side of the tub and drip down. If you have any questions, please let us know. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Removed a cap in the center of the tub basket which has a bolt that needs removed I believe it's a 9/16 after I removed the bolt I then removed the center of the bottom of the basket assembly which then allowed me to get to the basket hub that needed replaced it was a little dirty and I couldn't get it out so I sprayed a little penitrating oil on it let it sit a little then I was able to remove the hub and install the new one then I put it all back together and the washer is working great
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
