This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This kit includes one driver hub and two driven basket hubs. The basket hub is located under the agitator. If your washer is not agitating or spinning properly, the hubs will need to be replaced.
This part makes sure that the lid is shut before allowing the machine to start or agitate.
NOTE: This is a manufacturer substitution. Part may differ in appearance but is a functional equivalent to prior parts including
These parts are the replacement suspension rod supports for your washer. They are made of plastic and are approximately 1 ½ inches in diameter. This package will come with an 8-piece set of suspension...
This rotary position sensor is a genuine OEM part for your washing machine. It helps to ensure the load of clothing stays balanced during the wash cycle. Customers have rated this repair as easy. To c...
This hose clamp extends from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag brand washing machines.
This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.
The suspension rods are used to keep the drum assembly upright. The rods attached to the four corners on top of the cabinet to the base of the drum. When a rod breaks, the drum will be tilted which wi...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
Ask our experts a question about this model and we'll get back to you as soon as possible!
7 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Carol
December 10, 2023
The tub is very loose and hit the sides hard when spinning
For model number MVWB850YW1
Hi Carol, thank you for reaching out. Checking out your washer suspension rod kit, part number PS3502193, may help you figure out the cause behind the problem that you are facing. We hope this is helpful!
In spin cycle super loud roaring noise, sounds like bearings maybe (tub bearings)?
For model number MVWB850YW1
Hello Bryan and thanks for writing.
Sounds like you need to replace the basket hubs which are basically bearings. Kit Part Number: Part Number: PS11723155 is in the list of compatible items for your model. We hope this helps. Please contact us anytime.
In the videos I've watched they show replacing actual bearings. I do not see that in the parts list. This is to eliminate loud roaring noise like bearing going out in spin cycle.
For model number MVWB850YW1
Hello Michael, Thank you for the question. The Bearing for this model was only sold as part of the Outer Tub. I looked up the part and it is listed as No Longer Available/Discontinued sorry. There are no part substitutions listed. Our suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers. We hope this helps.
Rinse and spin cycle keeps filling and slowly spins then refills water again, throws ul code and stops
For model number MVWB850YW1
Hello Eric, Thank you for the question. The UL is the code for unbalanced load. We suggest checking the Suspension Rods for wear or damaged causing the drum to be off balance. We hope this helps!
Was this helpful?
Thank you for voting!
George
August 24, 2022
washer stopped starting the spin cycle,1" of water left, checked the drain hose and supply lines, OK, tried the 10 min unplug for reset, if I unplug and plug back, the lights come on when, I do start it turns off. What next?
One towel was torn and frayed (six towels total)
For model number MVWB850YW1
Hi George,
Thank you for your question. If your washer does not spin, there are some parts that you will need to check to see which one is causing the issue. You will need to check the lid lock assembly, the basket hub kit and the sensor. We have included a link that you may reference on how to check these parts. Once you have determined the part you need, please feel free to call customer service. We are open 7 days a week and anyone will be happy to assist you. We look forward to hearing from you!
Removed a cap in the center of the tub basket which has a bolt that needs removed I believe it's a 9/16 after I removed the bolt I then removed the center of the bottom of the basket assembly which then allowed me to get to the basket hub that needed replaced it was a little dirty and I couldn't get it out so I sprayed a little penitrating oil on it let it sit a little then I was able to remove the hub and install the new one then I put it all back together and the washer is working great
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
