Leaking | No hot or cold water | Water Filling Issues
This part works with the following products:
Washer.
This part works with the following products:
Frigidaire, Kenmore, Crosley, Electrolux.
Part# 134371220 replaces these:
AP3844429, 1154728, 134371220, 134371210
Customer Reviews
Average Rating:
★★★★★
★★★★★
18 Reviews
4.9
Filter By Rating:
5 Stars
16
4 Stars
2
3 Stars
0
2 Stars
0
1 Star
0
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Anne S - May 15, 2021
Verified Purchase
Easy to do it yourself.
Part Select's website was friendly and finding the right part was easy. Delivery only took a few days and my Frigidaire washer was up and working like new. Anne
★★★★★
★★★★★
Dave J - November 20, 2018
Verified Purchase
Excellent service.
Works perfect It was delivered the next day. Great service.
★★★★★
★★★★★
Danea W - July 14, 2023
Verified Purchase
Easy repair! Great part.
The part came just as it was listed. Replaced the broken piece and it worked perfectly.
★★★★★
★★★★★
BRIAN L - March 8, 2023
Verified Purchase
WASHING MACHINE WATER INLET REPLACEMENT
PART AS GOOD AS O.E.M. - ALMOST IDENTICAL; EASY REPLACEMENT; MACHINE AS GOOD AS NEW.
★★★★★
★★★★★
YVES S - May 29, 2022
Verified Purchase
Very true. Easy installation.
Thanks
★★★★★
★★★★★
Brendan M - June 4, 2019
Verified Purchase
Exactly as ordered
Part was in great condition. Exactly as ordered. Repaired the issue.
★★★★★
★★★★★
Sylvain B - March 5, 2023
Verified Purchase
Exactly as expected
Easy fix with YouTube instructions. Perfect part. Took less than 30 minutes to change.
★★★★★
★★★★★
XI J - August 17, 2022
Verified Purchase
????
?????,????
★★★★★
★★★★★
Darren S - April 13, 2021
Verified Purchase
Easy repair
Too way to long to get the part but fixed now ,works perfect
★★★★★
★★★★★
Rob K - May 21, 2020
Verified Purchase
Easy fix
The part was an exact match and works perfectly.
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 3.5 / 5.0, 11 reviews.
What's this?
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Valve dispener would spray water all over inside of washer.
My husband made the repair. First, he had to remove the dryer off of the top of the washer since it's a stacking unit. Disconnect water lines. Next he removed two screws from the back of the washer that allows you to remove the lid. Now unsnap a trim piece that is on the back surrounding the water connections and an exhaust port. Reach inside the washer, turn the exhaust port unlocking it and pushing out the back of the washer as far as you can to get it out of the way. Disconnect the electrical lines from the valve dispenser. Remove the two screws that fasten the valve dispenser to the washer. Install the new dispenser and reassemble.
Other Parts Used:
Julie from Lancaster, OH
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set
80 of 91 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Frozen pipe
Removed top cover to get access to intake pipe for hot & cold water. Remove electrical connections and two screws replaced part and cover. Thanks very quick service.
Other Parts Used:
Frank from Auburn, NH
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
18 of 26 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I had tried to clean the small basket type screens at the rear of the inlet valve but both of them disintegrated
Following the instructions on your page I was able to see quite clearly what needed to be done. I received the new part promptly and my machine is now working fine. However, the ongoing story with the dryer is another matter.
Other Parts Used:
George from INMAN, SC
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
15 of 24 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water pooled in machine when not in use with door left open and turned off.
I unplugged the washer, turned off hot and cold water at the source. I wrenched off the 2 hoses from the washer (have a towel handy for the residual water in the hoses and keep them elevated until you can drain the residual water out into drain site, where you turn off the water supply). I removed the 2 screws that held the top panel on (back side top corners) & slide off top to see interior. I used screw driver to pop off plastic piece that secures 3 tubes (hot water, cold water & exhaust vent). I then unplugged all 3 wire harnesses from the water valve & temperature wire from left side [assuming you are standing at the back of the machine where you have to be to do all this work]. I then untwisted the exhaust vent plastic tube (large cream tube at far right in machine) & somehow managed to get it pulled out. I then unscrewed the 2 screws from the old water valve- one on left is easy, the one on the right is difficult due to lower position next to exhaust vent - I had to hold my other hand [thankfully I have small hands] under the screw location as my screwdriver was not magnetic so I wouldn't drop the screw into the machine). I then removed the valve assembly by pulling slowly backward & removed. I then just reversed the above to replace the new one. Not bad for my 1st washer fix ever. I've used it 5 cycles now and no issues.
Other Parts Used:
Stephanie from SACHSE, TX
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Wrench (Adjustable)
11 of 12 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water leaking from inlet hose area.
Close examination revealed cracked plastic inlet area. I removed top of machine any carefully was able to loosen an pull damaged (froze over the winter) part back to remove. Attachment screws difficult to access, had to use magnetic screwdriver attachment during reassembly. Always iffy when working with plastic parts. Part arrived 2 days later, took about 40 minutes to install.
Other Parts Used:
Andrew from Mastic Beach, NY
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers
8 of 11 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wet clothes after spin cycle on front loader
Found that the fill valve was leaking and clothes would be wet if not removed right away. Removed 2 screws from back of top panel and removed panel. Disconneced water lines and two screws held valve assembley to detergent dispenser and unplug wires from the 3 solenoids
Other Parts Used:
Tracy from Brazil, IN
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
7 of 10 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
crack in plastic housing
first removed top of machine. removed 3 valve core wires set. Then removed left top screw on valve. Then removed vent tube to get to lower right screw. disconnected hose connect rack so valve housing could be removed & new installed. Rapped insulation around valve & installed. Put everything back together in reverse order.
Other Parts Used:
Jim from Tucson, AZ
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
5 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer was filling with water when not in use
This repair was pretty simple. Unplug washer from electrical outlet and remove hoses. This is a good time to replace the hoses. Removed two screws at the back of the washer to remove the top of the washer. This exposed the faulty valve assembly. Disconnect the three connections. There are two screws holding this part in place. The top one is easy to remove, the bottom one is a little more difficult due to access. Remove plastic retainer plate on back of washer. Remove faulty valve assembly. There are two rubber grommets/gaskets that will need to be removed from the faulty part and installed on the new part. Slide new assembly into place. Secure with the two screws. Replace retainer plate. Reattach power connections. Reattach hoses and finally Reinstall top of washer. Total time was right around 30 minutes.
Other Parts Used:
Dan from LONE TREE, CO
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the part cracked from water freezing
First I removed the two screws that hold the part in place. I then pulled the part out about 3 inches and disconnected the three wires from the part and put the new one in
Other Parts Used:
Kathy L from Twin Lake, MI
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
2 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer was in the garage, and we had a hard freeze. Water in the valve froze, breaking the valve.
Took the top off the washer, removed the valve, installed the new one, back in buisness. It was so easy to order the part, and have the repair done in no time.
Other Parts Used:
Alan from Eugene, OR
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
2 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
15 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dave
October 5, 2017
I have a machine that starts to allow water in and then stops and does nothing else.
For model number FAFW3511KW0
Hi Dave,
Thank you for your inquiry. If the washer starts to allow water in and then stops and does nothing else, then you will need to check the water inlet valve. I hope this helps. Thank you and have a great day!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Irene
January 22, 2020
Does the washer valve have o rings on the end
For model number FAFW3801LW3
Hello, Thank you for writing. Here is the O-ring you need, it is not sold with the valve. Part Number: PS1145697. We hope this helps.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Katherine
February 12, 2020
My Electrolux/Frigidaire washer works great, have replaced door lock failure already but now i have a drum filled with water about once every three weeks when i come down to do laundry. Yesterday it was all over the floor which i guess tells me the boot may be leaking too, and that the water is still coming in when i walk away. Is this likely the water inlet value?
For model number LLTF2940FE1
Hello Katherine, Thank you for the question. In most cases the Valve will need to be replaced. The port can become "Stuck" open and allow water through when not in use. We hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Caleb
April 29, 2019
My washer leaks and it looks like it comes from underneath the machine and not sure where to start. I do not think its coming from the door as the water never runs out of there during the whole cycle.
For model number FAFW3517KRI
Hello Caleb, thank you for inquiring. For this symptom you will want to replace either the Water Inlet and Dispenser Valve part PS1145692, the Drain Hose part PS975871, or the Drain Pump part PS7783938. We hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Shmonster
January 28, 2024
Hello.
The cold water will not shut off when the machine is started and continue to run non stop even when the machine is set to off .
This happens on each setting. I’ve tried unplugging the power to reset the machine but that didn’t help.
Than you .
For model number GLTF2940ES2
Hello Shmonster, thank you for getting in touch. Based on our understanding of the issue, we would recommend replacing the water inlet valve, part number PS1145692. It control and monitors the amount of water flow into the washer. We hope this solves your problem!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Carol
November 12, 2025
House is on a well system. Water quality is soft. During water fill cycles, the water flow is slow, and machine shuts down on E10 code (no water). This has always been a problem with this machine when the machine is full; however, it now happening on smaller loads. Water supply line is 1/2", and hoses are 3/4". Water pressure is above 30 PSI
For model number GLTF2940ES0
Hi Carol, thank you for reaching out. The error E10 indicates that the washer is taking too long to fill. We would suggest checking the water level switch, part number PS1990814. You may need to replace it to fix the issue. We hope this sorts out your problem!
All lights flash and beep when machine is off. Must unplug after each use. Also has a code e41. Already replaced lock and switch. Any help would be appreciated. Ready to throw in garbage. Only 7 years old.
For model number DAFW3577KWO
Hello Domenic, Thank you for your inquiry. I would check your wiring harness and your control boards with a multimeter. If you are unfamiliar with how a multimeter functions, there are YouTube videos available to assist you. Hope this helps
1 person found this helpful.
Was this helpful?
Thank you for voting!
Bob
March 26, 2018
My washer will not fill, water valves are on.
For model number FAFW3801LW3
Hi Bob, Thank you for the question. If the valve is getting power but not releasing water into the tub it may need to be replaced. PartSelect Number: PS1145692. If the valve is good you may have a defective control board, PartSelect Number: PS3492720. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Charles
December 26, 2017
My washing machine will go through it complete washing cycle but at the end of the washing cycle the door stays locked and the cold water starts to fill up in the machine. The only way to stop it is to un plug the machine. But when i plug it back in to power the cold water starts filling it up again. Is this the water inlet valve that's causing the problem. I have a lot of sand in my water and it has got into the inlet valve.
For model number CFW4500KW0
Hi Charles, Thank you for the question. I suggest trying to clean the valve out first and if this doesn't fix the issue the valve will need to be replaced. Hope this helps!
Was this helpful?
Thank you for voting!
Calin
January 30, 2019
How do i know which of the 2 parts i need:Ps1145747 or 134371220?
Hello Calin, Thank you for your inquiry. In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Having a problem with a funky-smelling washing machine, or one that just doesn't seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing help...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
