Ask our experts a question about this part and we'll get back to you as soon as possible!
10 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Charles
November 18, 2019
I’m needing the tub bearing #7 but it only shows the slider with is #8 for #7 and 8
For model number MVWB835DW0
Hello Charles, thank you for writing. The Tub Bearing is only included with the Clutch Kit, this Slider part number PS10060062 for your model washer. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Timothy
December 17, 2023
During the wash cycle, I hear a squeak noise come from the drum area. When the drum is at low speed cycle, agitating, the squeak varies in sound. It is definitely a rubber sound squeak, not a metal to metal squeak. I was researching this site to evaluate the assembly and maybe see if it has a belt drive system. Being it’s a direct drive, I’m now looking elsewhere in the parts assembly for a possible solution. If you any more information, please ask.
For model number MVW7230HW0
Hi Timothy, thank you for reaching out. We would recommend replacing the clutch slider gear assembly, part number PS10060062. Good luck with the repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Charles
November 21, 2019
I’m looking for the drum bearing. The correct part number don’t come up in the parts diagram
For model number MVWB835DW0
Hi Charles, sadly we could not find the requested part. I recommend contacting the manufacturer and seeing if they could provide you with a part number, and then you are always welcome to check back to see if we carry the part. Hope this helps!
Was this helpful?
Thank you for voting!
Angel
October 1, 2023
My Whirlpool Cabrio (wtw8500dc0) does not agitate correctly, is this the part I need to fix the issue? ( Slider part# ps10060062) oo do I need the (clutch kit part# ps10064562)?
For model number Wtw8500dc0
Hi Angel, thank you for reaching out. According to our research, you may need to replace the slider kit, part number PS10060062, to fix the issue. It spins the basket during the spin cycle. We hope this helps!
Was this helpful?
Thank you for voting!
Matt
December 5, 2023
My washer stops during the spin cycle sometimes. I can restart it on the drain spin cycle and it will complete it.
For model number mvwb765fw3
Hi Matt, thank you for reaching out. Based on our understanding, the issue is most probably with the washer control board, part number PS16217891. It manages the washer's functions such as filling, washing, draining and spinning. You may need to replace it to fix the issue. We hope that helps!
when spinning does not get clothes completely damp still wet
For model number MVWB835DW4
Hello Jim, thank you for the question. Check the drain hose, drain pump, and drain filter that could be blocked. Make sure the washer is not unbalanced and you are not using the wrong detergent. If this is not the issue, you will need to replace the drain pump, part number PS11738156. We hope this solves your problem!
I’m replacing the gear case on my Maytag mvwb855dw0 and I already have the part. Anything else I should replace while I’m at it? Washers? Gaskets?
For model number mvwb855dw0
Hi Greg, thank you for reaching out. Based on our research, you may need to replace the washer, part number PS11770333, along with it. We hope that helps!
Agitator does not move. Can hear grinding when it tries to agitate. Drum spins correct during spin cycle. Do I need to replace the slider assembly?
For model number WTW8500DC0
Hello Keith, thank you for contacting us. According to our research, the issue could be with the clutch, part number PS10060062. We would recommend replacing it to solve the problem. Glad to be of help!
Was this helpful?
Thank you for voting!
George
February 13, 2024
Hi I have a Maytag washer is making this grinding noise when in wash cycle do you know what it is?
For model number MVWB765FW0
Hello George, thank you for your inquiry. Your washer may be facing this issue because of the gearcase, part number PS12741641. It drives the agitator and spins the basket in the washer. You may need to replace it to fix the issue. Glad to be of help!
My washer is leaking some kind of oil, quite a bit, and water. It splashed on the sides of the bottom of my washer and leaked out the bottom in a puddle. Is it possible I need to replace the sliders or bearings?
For model number MVWB755DW1
Hi May, thank you for your inquiry. Based on the description, the issue is because of the trust washer, part number PS11770333. We would recommend replacing the trust washer to fix the issue. Glad to be of help!
