This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This hose clamp extends from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag brand washing machines.
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This po...
Are you dealing with a faulty washplate in your washing machine? Meet the Whirlpool Washer Washplate Screw, your personal helper for securing loose or broken washplates. This genuine OEM part is highl...
This drain pump is engineered for top-load washing machines and plays a vital role in the appliance’s drainage system. During the drain cycle, it efficiently removes water from the washer tub and chan...
This clutch slider kit is part of the transmission system in select washing machines, helping control the movement and speed of the agitator during wash and spin cycles. The kit includes a clutch band...
This clutch assembly is designed for use in top-load washing machines, where it plays a crucial role in engaging the transmission during both the agitation and spinning cycles. If your washer is exper...
Ask our experts a question about this model and we'll get back to you as soon as possible!
7 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Rashid
December 5, 2019
How to use diagnostic test.
For model number 11031633611
Hello Rashid, Thank you for the question. To enter diagnostic mode, With the washer shut off and all indicator lights off, turn the control dial 1 complete rotation (360 degrees) counterclockwise. All the green status lights blink when you successfully activate the diagnostic mode. If the status lights don’t blink, turn the control dial one complete rotation counter-clockwise to reset the control and then try again, this time turning the knob faster. With the washer in diagnostic mode, follow these steps to display the error code lights: Turn the control dial 1 click clockwise. Press the Start button. Turn the control dial one click clockwise to display the first saved error code. Turn the control dial one click clockwise to display the next error code. The control displays up to 4 error codes. Just the Sensing light flashes if no error code was recorded. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Raymond
January 10, 2020
The machine is displaying a f5 error code and starts to beep
For model number 11031633611
Hi Raymond. Most likely have a loose connection at the tub sensor , or a bad heater. Thank you for your question and good luck with your repair!
Hola María, gracias por la pregunta. Verificamos el número de modelo provisto y encontramos que este modelo de lavadora no tiene luz dentro de la tina. Si necesita ayuda para realizar un pedido, el servicio de atención al cliente está abierto los 7 días de la semana. No dude en llamarnos. ¡Esperamos con interés escuchar de usted!
Was this helpful?
Thank you for voting!
Carlene
November 24, 2023
What does code LF (F8E1) Mean? How to repair?
For model number 11031633611
Hi Carlene, thank you for reaching out. The error code F8E1 or LF indicates the long fill time or there is some problem with the water supply going to the washer. We would recommend checking the water inlet line for clogging. If the issue still persists, you may need to replace the water inlet valve, part number PS12348766, to fix the issue. We hope this solves your problem!
Hi Keith, thank you for reaching out. The DRN error code means your washer is not draining properly. We would recommend cleaning the drain hose if it is clogged. If that is not the case, then you may have a defective drain pump, part number PS11738156. We would recommend replacing the drain pump to fix the issue. We hope this solves your problem!
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
DIY'er working on a Maytag Centennial type washing machine should be aware that replacing a a transmission or agitator due to worn out splines is only half a job done well. I originally replaced my transmission due to worn splines, only to discover later that the worn agitator splines caused the new transmission splines to wear out at an accelerated rate. Transmission and Agitator should be replaced together, along with a new Agitator mounting bolt. There are plenty of video's online of how to do this repair so I won't get into that here. Just wanted to drop the above sage advice. Transmissions for these washers aren't cheap.
Nothing to it. Just remember to put the insert in the knob, NOT on the selector stem. Line up the flat part of the insert with the flat part of the stem and push the knob in place.
Don NOT ram it on the selector stem. When it's seated, don't push any more. That's all there is to it. It works. If the pointer on the knob indicates the selector is lined up correctly, but it isn't, the problem is the selector, not the knob.
