SU111 Jenn-Air Range - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
wanted to replace the grill unit
removed the grill element and plugged in the new cartridge element. very simple
Parts Used:
-
Brenda from Jonesboro, LA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
22 of 691 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
needed a new coil element for my 20+ years old stovetop.
-
Elissa from Fort Thomas, KY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
20 of 686 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Large element on one cartridge & small element on the other cartridge
First of all, I could not believe how quickly I received the 2 new Jenn-Air Coil element cartridges!! It seemed like I had just ordered them and next thing I knew, Fed-Ex was ringing my doorbell to deliver them!! Also, I received both cartridge boxes at the same time so this was really great! My experience in the past in ordering two of one item is that the second item is usually shipped a few days later.
This was one of the easiest installations & repairs I have ever done! Given the age of the stove, the old cartridges had a burner on each one that did not work properly. Also, one of the cartridges was beginning to rust on the underside, due to age.
It took approximately 2 minutes to remove the old burner cartridges and install the new ones. All I had to do is slightly lift the lip edge of the cartridge and "unplug" it from the stove which merely entailed either moving the cartridge toward me or away from me, depending on which side of the stove I was replacing the cartridge on. Then, I just simply slid the cartridge into the appropriate plug in the stove. That was it!
I immediately checked all burners and I could not believe the difference! The burners immediately reached the desired temperature whereas the old elements that worked took a couple of minutes to heat properly. Now, the Jenn-Air looks like a new stove and is ready for holiday cooking!!! Thank you so very much for processing my order quickly. I will definitely order any future parts needed from your company. On a scale of 1 to 10, I give you an 11.
This was one of the easiest installations & repairs I have ever done! Given the age of the stove, the old cartridges had a burner on each one that did not work properly. Also, one of the cartridges was beginning to rust on the underside, due to age.
It took approximately 2 minutes to remove the old burner cartridges and install the new ones. All I had to do is slightly lift the lip edge of the cartridge and "unplug" it from the stove which merely entailed either moving the cartridge toward me or away from me, depending on which side of the stove I was replacing the cartridge on. Then, I just simply slid the cartridge into the appropriate plug in the stove. That was it!
I immediately checked all burners and I could not believe the difference! The burners immediately reached the desired temperature whereas the old elements that worked took a couple of minutes to heat properly. Now, the Jenn-Air looks like a new stove and is ready for holiday cooking!!! Thank you so very much for processing my order quickly. I will definitely order any future parts needed from your company. On a scale of 1 to 10, I give you an 11.
Parts Used:
-
W.C. from Elberta, AL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
20 of 686 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No problem, just wanted 4 burners instead of 2 + grill
This was a plug-in cartridge, so it really didn't need to be installed. However, as I unpacked it, I noticed that there was a blue plastic film sticking out from the edge of the underside. We had to take the cartridge apart to remove the plastic film. I didn't want to take the chance of it catching on fire.
Parts Used:
-
Marsha from SOUTH LAKE TAHOE, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
20 of 687 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
burner going out
-
thomas from missoula, MT
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
20 of 687 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
One of the elements quit heating
I removed the old coil element cartidge & slid the new one right into place. Simple repair in a short amount of time!
Parts Used:
-
Connie from Perryville, MO
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
19 of 685 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Only 2 out of 4 stove tops worked.
It was so easy - we just unpacked the cartridges and plugged them in and the stove looks and cooks like new! We were amazed and kicking ourselves for not having done this sooner.
Thank you.
Thank you.
Parts Used:
-
dolores from Rosenberg, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
19 of 685 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
plug in burner wouldn't heat correctly.
Very simple..it took 2 seconds, just unplugged the old one & plugged in the new one. I should of done this a long time ago. It was perfect timing for Thanksgiving dinner! Thank-you so much.
Parts Used:
-
Rhonda from Hyannis, MA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
19 of 685 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Got new black granite countertops and the cooktop looked old and dated with the element cartridge on one side and the griddle on the other side
Removed the griddle and cleaned underneath. Replaced it with the new cartridge. Removed the otherside (old coil cartridge), cleaned underneath and replaced it with the new cartridge. My stove now blends beautifully with my new countertops without having to replace my whole slide in downdraft Jenn-Aire range! Saved my about $2000!
Parts Used:
-
Patricia from Knoxville, TN
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
19 of 685 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
cartridge plug non functional
The old cartridge was pulled out (unplugged) from the stove top and the new one was plugged in. What could be simpler, and I did it myself. I am glad I knew what was the problem, so it was easy. The promptness of your company was astounding, the day after my order online and a phone call. Fabulous business!!
Parts Used:
-
Ilse from Napa, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
19 of 685 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Coils would not heat up unless both control swithes were on high
I always wanted an extra cartridge for my stove. The grill it came with never got used. Now I have a 4 burner stove. However I need to look at the control switches. The brand new cartridge works the same as the old one did. I figured this would be the case.
Parts Select did a great job getting me the insert. Now I need to order up the switches. Hopefully them we will be back in business. More trouble shooting on the way...
Parts Select did a great job getting me the insert. Now I need to order up the switches. Hopefully them we will be back in business. More trouble shooting on the way...
Parts Used:
-
Daniel from Salem, WI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
19 of 685 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
One of the two elements did not work
I pulled out the old one and slid in the new one... if you can plug in a lamp, you can do this. They couldn't have made it any easier.
Parts Used:
-
Erik from Evans, GA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
19 of 685 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The other cartridge was 24 years old
I cook on the stove top daily and have been the homeowner for 7 years. The cartridges obviously were showing signs of wear and tear, so I ordered the cartridges from Parts Select.
I was so impressed with the packaging and the shippment package. There was no way the cartridges would not be working....and I was right!
It was so easy to install and so improved the appearance. I do believe the coils are heating better than the old ones.
What a way to dress up and old stove. I remember my father always saying, "if it isn't broken, don't fix it". I just improved what I have, can still use all the accessories, and am very pleased with Parts Select.
Thank you for making this so easy,
Sandra (Leesburg, VA)
I was so impressed with the packaging and the shippment package. There was no way the cartridges would not be working....and I was right!
It was so easy to install and so improved the appearance. I do believe the coils are heating better than the old ones.
What a way to dress up and old stove. I remember my father always saying, "if it isn't broken, don't fix it". I just improved what I have, can still use all the accessories, and am very pleased with Parts Select.
Thank you for making this so easy,
Sandra (Leesburg, VA)
Parts Used:
-
Sandra from Leesburg, VA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
19 of 686 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wanted an updated look
Unplugged the old cartridges and plugged in the new ones. Not one thing to unscrew. Everything went well. Service from Partselect was beyond belief and delivery was alsolutely beyond my imagination. Placed order on Thursday afternoon right before 5 o'clock -- delivered to my front (way out in the countryside) before 9 o'clock on Saturday Morning from Abilene, Tx which is 50 miles away.
The entire experience went PERFECT!!!!!! Hope nothing needs any repair but when and if I will order from Partselect.
The entire experience went PERFECT!!!!!! Hope nothing needs any repair but when and if I will order from Partselect.
Parts Used:
-
Vera from Moran, TX
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
27 of 1086 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replace element cartridge
Only had to lift out the old cartridge and put in the new one. It was really easy.
Parts Used:
-
Alice from Westfield, IN
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
37 of 1264 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!