SU111 Jenn-Air Range - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Burners were not working, metal was old and destroyed.
I pulled out the old cartridge, cleaned the stove top and inserted the new cartridge. No problem!
Parts Used:
-
Karen from Bethlehem, CT
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
element burned out-burners did not work
the new element came, I unplugged the old one and plugged the new one in. 5mins max
Parts Used:
-
JohnPaul from Ft. Bragg, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
none
-
Albert from Annapolis, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
wire on one of the burners was frayed and exposed
took old burner out and put in new burner. No problem. Easy greasy
Parts Used:
-
Richard from Baton Rouge, LA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the elements were old and I only had one set, but had the grill
I just had to pull the old ones out, and pop in the new ones. It took longer to get them out of the box, than to replace them. Thank You for your fast ordering and shipping.
Parts Used:
-
Deborah from New Plymouth, ID
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replace grill elements with convention coil elements
Easy as 1-2-3. Opened the box, took out the new electric coil elements, plugged it in to our stove and it worked perfectly.
Parts Used:
-
Kenia from Miramar, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Needed additional cooking space
I removed the element from the box it was shipped
in. I did this very carefully with two hands and then
plugged the new element into the electrical outlet
and turned on the element using all available
heat cycles. It worked perfectly and was exactly
the same color as the older one.
I suggest you use two hands in performing this
very delicate manuver.............j
in. I did this very carefully with two hands and then
plugged the new element into the electrical outlet
and turned on the element using all available
heat cycles. It worked perfectly and was exactly
the same color as the older one.
I suggest you use two hands in performing this
very delicate manuver.............j
Parts Used:
-
Joe from Clinton, OK
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
cook top is not working
-
bintu from brinkley, AR
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
part shorted out due to rust
-
vivian from west orange, NJ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Worn Oven Seal
If you have some mechanical ability it is a eazy fix, remove the 2 screws attaching door to oven, disassemble the back screws, and inner panel, remove oven seal, and reverse the process.
Parts Used:
-
Wesley from Avon, IN
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Needed to replace Jenn-Air Coil Element
-
Ruth from New Hope, MN
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
A cartridge (set of 2 electric burners) which I bought 6 months ago had a short.
1 phone call to PartSelect and I found out they warranty their parts for 1 year. They shipped a new one immediately.
Great service!
Great service!
Parts Used:
-
Marilyn from Bloomfield Hills, MI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Our coil elements were looking worn.
We took out the old element cartridges, and plugged in the new cartridges. It was easy, and made our cook top look fantastic!
Parts Used:
-
Harriet from Coppell, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Large old style burner was having problems.
It was jus a matter of unwrapping the cartidge, unplug and remove old and plug in. What a difference, should have done this years ago.
I will use this company again.
I will use this company again.
Parts Used:
-
Marie from Federal Way, WA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old cartridge burner plate connectors had failed
Simply bought a new cartridge, pulled the old one out and put in the new one. The best thing was that I used another cartridge bottom to replace the bad connectors on the still shiny top and then had two good looking cartridge tops.
Parts Used:
-
John Davenport from Upper Black Eddy, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!