SU111 Jenn-Air Range - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Needed radiant element cartridge
-
bill from dallas, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
36 of 1278 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The range burner cartridge would not heat unless you pulled it out several times and plugged it back into the socket. In addition the element was not heating well.
Only repair needed was to simply unplug the old burner carridge and plug in the new one. The new one is FANTASTIC.
It gets hot as soon as you turn it on.
It gets hot as soon as you turn it on.
Parts Used:
-
Ray from Pinetops, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
36 of 1313 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The stove looked ancient but ran great.
I ordered 2 Radiant Element Cartridges to replace the original element cartridge and a coil cartridge. In less than 8 minutes my 20yr old stove looked brand new.
Parts Used:
-
kimberly from rochester, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
57 of 1990 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
replaced grill with coils (burners)
Just pulled the old grill out and plugged the new coil/double burner cartridge in. It took less than a minute to do. Easy as 1, 2, 3....and looks amazing! Just like a new cooktop!
Parts Used:
-
James from Hurricane, WV
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
167 of 4529 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
everything worked out great but...
the old burner element caught fire and now the range top does not work. No fan or red light. I wonder if there is a breaker underneath as my breakers seemtobe on. Of course the entire unit mightbe kaput,too.To be continued.But PartSelect gets an A. I ordered Friday and was amazed to find carton at my door saturday.
Parts Used:
-
Laurence from Seal Beach, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
My burners were not working properly
It is just a matter of taking out the old cartridge and replacing it with the new on and it looks like a almost new stove. Works amazing.
Parts Used:
-
PATRICIA from REEDSVILLE, WI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
the old stove top insert quit working
it wen't fairly well, the old one popped right out and the new one slid right in no problem, till i turned it on and the wiring is wrong, the front burner turns on as it should, but when you turn on the rear, both burners come on.
Parts Used:
-
Jeremy from Julesburg, CO
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Replace Burner
Took out the old, replaced with the new! Simple. Easy. Right part the first try!
Parts Used:
-
Rose from ORFORDVILLE, WI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
My Jenn-Air had an old, very used element
with Jenn-Air, you just plug it in - just like that you have an almost new kitchen range.
Parts Used:
-
Edward C from Parishville, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
coil did not work
Thanks to you, I opened the package, unwrapped the new coil, plugged it in, and "Yeah!" Thanks for having the correct parts for my range!!!!!
Parts Used:
-
Lou from Wetumpka, AL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Old element cartridge no longer functions well, low heat
Lift large burner end of the element by the raised slot and pull old element out. Install the plug prongs of new element into cooktop plug and lower element in place. Done. My unit is 26 years old and I have replaced elements several times. I keep a spare on hand for replacement and the one I ordered is now my spare.
Parts Used:
-
Harry from Saint Marys City, MD
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Old Electric Eye became rusty and discentegrated ....
Unplugged old one ..... plugged in New one ! That' why I own 3 Jenn Air Ranges The oldest are both 27 years old and work and look NEW !
Parts Used:
-
James Byrd from Delray Beach, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Conventional cartidge burners were 35 years old, starting to have power connection problems at the burner level.
Removed the 2 old cartidges and replaced them with the new ones in less than 2 minutes. Perfect fit! Worked immediately like a charm! We now have a new Jenn-Air! Received the 2 FedEX packages within 24 hours from our phone order. Phenomenal!
Parts Used:
-
Stephen from Annapolis, MD
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Old and ugly from not cleaning up pot overflows.
Received units,unpacked, plugged in units turned on and started cooking. Now won't that EASY?
Parts Used:
-
James from Durham, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Wanted to replace grill element with standard 2 eyes.
Super easy. It just plugged in. The phone rep was nice, efficient, and knowledgeable. Absolutely no complaints.
Parts Used:
-
Kristin from Atlanta, GA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!