JES1133WD01 General Electric Microwave - Instructions

The groove inside the microwave that the rotating ring guide traveled was rusted due to moisture; the rusted groove caused the rotating ring guide to lag, putting pressure on the ring guide until it broke. I sanded the rusted area and repainted. The interior of microwave looks like new and the rotating ring guide now has a smooth surface to rotate. The ring guide was very simple to install without any tools.

Used diagram on the web-site and a screw driver to replace the fuse and just one of the 2-Terminal Micro-Switches. When I looked at the three micro-switches one of them had a brown connector and you could see it had been burned. I just replaced that 2-Terminal Microswitch and the connector and the Fuse. Now the Microwave is working fine.

bought a fuse but that didn't solve the problem. Guess I need a new microwave

Removed cover, diagnosed problem, ordered part from Parts Select, received part in 2 days, replaced part, tested and replaced oven into built in space.

I have the built-in microwave in the cabinet. The hard part was getting it out of the cabinet. Once out, removing the cover and replacing the bulb and fuse was very easy. You need the tamper proof star bits to take out the screws holding the cover to the microwave. I got the bit set from Amazon for about $8. My fuse was OK. But I replaced it anyway, since it was 4-year-old. I am no expert in appliance repair, but found it fairly easy to do the repair. After unplugging the microwave, wait for 20 to 30 minutes before opening it, so that the capacitor inside completely discharges. It is supposed to discharge in 30 seconds, but why take a chance of electrocution..?

First unplugged the microwave, took top grill off, took control panel off, took wires off and used color coded tape to make sure they went back in right places, took fuse out and replaced it and put every thing back and it all worked fine and to top it off my wife did it all. So it was pretty easy.

Removed microwave cover using screwdriver and anti tamper bit available at local hardware store. Megnetron had broken magnet making discovery of deffective part easy. Removed wire connector and three screws attaching magnetron to case, removed magnetron and installed new item in reverse order. Installed cover and made popcorn for operational check of microwave. Happy days..........

Took off cover , unpluged switches , took off switch assy, off/on test hooped and howlered for about 5 mins .Then laughed about other sites said could get those switches. Just wanted to say I LOVE Partselect. Super fast del , great price. JUST AWSOME!!!!!!!!!!!!!!!!!!!!!!!!!!!!