BX518VW (P1324301W W) Amana Refrigerator - Instructions

My comment isn't the repair which was very simple, it's how fast I received the part. Very quick service thanks

removed old screws and replaced broken handle with new one.

This was a very simple repair. I had it done before my husband even got home. It was a matter of removing 2 screws and the handle and replacing it with the new one.

Part was easy to order, delivered quickly, installation very easy. Just unplug the unit, pop out the old swich using a screwdriver, disconnect and reconnect leads and pop switch back in. Definitely recommend that you can do it too.

Pry old switch and pull out. Disconect two wires. Put two wires on new switch, must be inserted right and connections not loose. Put switch in, making shure wies do not come off and snap in place

I noticed that the refrigerator was having trouble maintaining temperature. Thought it might be time for new one until I found out that a new frig was $5k to $7K. Just happened to notice that the light switch didn't look quite right (was not sitting sqaure to the door). Once I pressed it it came loose. I then realized the the lights were staying on (50 watts of heating). Replaced the switch and the frig started working like new.

Undid two screws, replaced part, tightened screws.

removed the 2 screws that held the panel in place, had to reach up and push on locking tabs to lower trhe front of the panel. was able to then push on the locking tab of the switch to release it. removed the wires, replaced them onto the new switch, and snapped the switch into place. the rest was reverse of the uninstall process.

Ordered new part
and installed using the original screws

I removed the 2 screws holding the handle in place. Took the old handle off. Lined up the 2 holes on the new handle and put in the screws. Took maybe 2 minutes.

Very simple. I just used the old screws.

Great service. Unpluged old switch and pluged in new one. Works great

Repair job was not the story - I was totally impressed with the transaction. Your company has an easy website to navigate, good service and the part arrived faster than I anticipated.

Used a screwdriver to pry loose the old switch, swapped wires to the new switch and pushed it into the opening. Took about 2 minutes.

I removed the old screw from the freezer door, attached the new handle and I was done. The best part was how fast I received the new part. I placed my order one day and had it the next. I was very pleased.

Removed the old handle with screwdriver and replaced the new one in a reverse manner. Very easy to do.