61004754 Kenmore Refrigerator - Instructions

easy, followed instructions and installed new parts.

I followed the directions from the YouTube video, which were spot on correct! Loved it. No problems. I did have to wind the spring one more turn than it showed on the video, but that was easy to figure out. No problems!

went on line and ordered new ice maker for this model refrigerator. Received the new part. New icemaker provided video for replacement of ice maker.Used the video showing the removal and replacement of the ice maker to begin the removal process. (must remove one mounting screw, then raise the icemaker up then out to unlatch the fixture.) This took over one hour, then had to remove wiring arness. Instrucions indicated to "squeez" the locking clip holding the connector, it is impossible to see the connector so it was a "feel" process. It turned out that squeesing the connector from the sides, did not work, finally squeezing the locking clip (top to bottom) finally released the connector. Then the installation (per video) reversed the removal procedure and that turned out to be about a two hour task because to align the ice maker when you cannot see the alignment / holding brackets was a very difficullt task. Then when it was finally installed, the one mounting screw, would not align with the previous mounting hole, because the tab on the new one was longer, requiring drilling a new hole to hold the icemaker in place. The hole had to be made using the same (self-tapping) screw, since the space available when the icemaker is installed is very limited. After the mounting hole was partally made, driving the screw the rest of the way had to be done with a ratchet, other then that, everything was just great.