61004754 Kenmore Refrigerator - Instructions

First I cut the power to the refrigerator. Followed the instructions for removing the door panel. Disconnected the electrical panel to the door controls. replaced the flap only and reassembled. Hate I had to by the solenoid when all I needed was the flap. Ordered the part and had it the next day, very fast shipping. I have used PartSelect for other appliance parts and had good service from them.

I accessed the model with the model number, isolated the part and ordered it online. Very simple procedure and great online interface to identify the part. On receiving the part I disconnected the water line, followed the instructions to remove the bracket and then the valve. Re-attached the new valve and replaced the bracket. Attached the water supply and tested the valve. Once it all worked fine I moved the refrigerator back into position.

When calling to see what the repair would cost my prices ranged from 250.00 to 175.00 with parts and labor. But I decided to tackle this project myself after watching the installation video. My parts arrived quickly and I watched the video had my repair completed within 30min and saved myself over 100.00 dollars. Thank you PartSelect!! The step by step instructions made this project a breeze.

Removed two screws from face plate then nudged plate up until it cleared the two top screws. Removed three screws holding the actual kit in place. Gently pulled the unit forward and pulled the water tube out from above the kit, then disconnected the wires connecting the unit. At this time the unit is separated from the refrigerator and you can disconnect the solenoid to remove it. The plunger in the solenoid was a little different from the old one as it connects to the insulator flap bar but Partselect has made a good/easy modification for replacement. Before installation I recommend lubricating the plastic actuator switch. Reverse the procedures you used to access the unit. Very easy.

After Watching the Video, this Job was very easy. I moved the Refridgerator away from the Wall, disconnected Power, shut-off water shut-off valve, unscrewed Water Line and caught water in a small pan. Loosened up 1 screw and removed valve, unplugged 2 electrical connections and bottom water line. I cut-off an inch of line and reinstalled the valve in reverse order. Plugged Refridgerator back in and instantly had water at Dispensor. Now the ice-cubes are normal size. Thank-you PartSelect.

Removed dispenser unit, replaced solenoid and door support, and reassembled. Repair video on website was extremely helpful. Only needed door support but found it was easier to order and install the entire assembly with the new door. Item number PS2003478

Your video made this repair simple. Thanks for the info. Also received my parts on time. Keep up the good job .

I shut the water valve and bled the pressure off by using the water dispenser. Removed the four screws that hold the cardboard backing on the unit. Unplugged the power cord, loosened the metal water supply fitting. Then I removed all three hose fittings and dried the drips with a towel. I pushed the electrical plugs off with a flat blade screw driver. Removed the bracket attachment screw and pulled the double valve out. The new valves came with a push-lock fitting for the plastic hoses so I pushed them into their sockets. Put the new valve in and replaced the attachment screw. Reattached the water supply line and the electrical connectors. I turned the water on and checked for leaks. replaced the cardboard backing, and plugged the power cord back in.

The replacement went very well. Fast shipping, I watched the Video online and followed the simple instructions. Was done in 10 minutes

We put all the new parts in that came with this kit including the Solenoid. It was super easy. I have a home warranty which covered the refrigerator ice maker, however, it would have cost me $75 just to bring out a repairman and then it would have taken up my time to be around when he wanted to come out. Buying this part and doing the job ourself cost me less money AND time.

The home service repair through our utility company checked the refridgerator and then looked for parts. Their conclusion is the part was no longer available and we should "just reach into the icemaker when we want ice until we replace the refridgerator.) The refridgerator is a top of the line model and replacement cost is well over $2,000 so that wasn't a good option. So I checked PartSelect and found the part which I received in 3 days, installed it in a few minutes and we're back in operation!

Ordered solenoid, watched video, replaced solenoid, works great.

I followed the video exactly

I unplugged the refrigerater, then proceeded to remove the three screws that hold the dispenser face in position. When I lifted the dispenser face out of the way, I removed the remaining two screws that held the dispenser actuator pad in place. I lifted the unit away and turned it over. No need to unplug any cables. I simply lifted the old pad away, replacing it with the new pad. I re-assembled everything in the order in which I took it apart. Plugged the fridge back in. Tested the new actuator. Problem solved!

I replaced the door kit, solenoid and return spring. The old door was worn out and was no longer attached to the return spring. The repair was very simple and the instruction kit sent with the replacement parts was extremely informative and helpful. This repair took less then five minutes.