Roper Range Parts

Videos!

Your Price

$12.60

Roper Range Chrome Drip Bowl - 8 Inch

★★★★★

23 Reviews

PartSelect Number PS11750107

Manufacturer Part Number WPW10196405

This manufacturer-certified drip bowl is also known as a drip pan, and it is designed for use with cooktops and ranges. It sits below 8-inch burner elements and catches drips and spills from the cookware on the burner. The diameter of the drip bowl is approximately 10 inches. This replacement might appear slightly different, but it will fit your appliance. You will need no tools to complete this repair. Simply remove the burner element, remove the old bowl, line up the hole on the new bowl with the terminal block and drop it into place. Make sure the bowl is flat before reinstalling the element. While you have the element out you should inspect the terminals for corrosion, damage, or discolouration. If you notice any of those things you should also replace the element and terminal block. You will need to replace your drip bowl if it is lost, damaged, or can no longer be cleaned. This replacement part is sold individually. To extend the life of your new drip bowl we recommend you clean it regularly with soap and water. We recommend only using the recommended drip bowl for your appliance; generic versions will not fit properly which could affect the performance of your elements and cause long-term damage.

Fixes these symptoms

Element will not heat
See more...

Videos!

Your Price

$13.31

Roper Range Drip Bowl - 6 Inch

★★★★★

47 Reviews

PartSelect Number PS11750108

Manufacturer Part Number WPW10196406

This drip bowl is used for electric cooktops and ranges, it is designed to sit under a 6-inch surface burner. It catches the drips and spills coming from the cookware on the surface burner. This drip bowl is chrome, and it has a diameter of 8 inches. You need to remove the burner element to replace this part. Line the hole up with the element terminal blocks, and ensure the new bowl is flush with the surface of the cooktop before replacing the burner element. Drip bowls need to be replaced when they are lost, damaged, or you are no longer able to clean them adequately. This replacement part is sold individually.

Fixes these symptoms

Element will not heat
See more...

Your Price

$19.10

Roper Range Light Bulb - 40w

★★★★★

2 Reviews

PartSelect Number PS217532

Manufacturer Part Number 40A15

This 40-Watt light bulb is sold individually and is a genuine OEM replacement option for your home appliances. It is specially designed to withstand extreme temperatures, so this bulb is compatible with a variety of appliance types including refrigerators, ranges, microwaves, and dryers. It features a frosted glass bulb with a standard metal socket base, which allows you to easily unscrew the burnt-out light and twist the new bulb into place. Depending on your appliance, there may be a guard or cover protecting the lightbulb, in which case you may require additional tools to remove the cover. We recommend disconnecting the power supply to your appliance before changing the lightbulb.

Videos!

Your Price

$22.58

Roper Range Light Bulb - 40w

★★★★★

47 Reviews

PartSelect Number PS884734

Manufacturer Part Number 8009

This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these replacement bulbs are most often used to light the inside of refrigerators and ranges. It features a standard socket base, which means you simply unscrew the burnt-out bulb and screw in the replacement. Depending on the appliance you may require a screwdriver or nut driver to access the light bulb. We recommend you wear work gloves while handling this replacement part. It is constructed of glass and metal and is sold individually. Depending on the appliance and location of the bulb within it, you may want to consider disconnecting power and using a flashlight for easier access to unscrewing and re-screwing in your bulb during this repair.

Videos!

Your Price

$74.85

Roper Range Surface Burner Element Switch, Large

★★★★★

47 Reviews

PartSelect Number PS11740783

Manufacturer Part Number WP3149400

This control switch controls the stove top 8" surface burner. 8.9- 11.0 amp. This surface burner element switch is for an 8-inch surface burner on an oven, stove, or range. The element switch controls the heat of the surface burner. Disconnect power to your range before completing this repair because you will be working closely with electrical circuits. Remove the screws from back panel and the console, and remove the console to expose the switch. It is recommended to check for overheating or arcing on the wiring harness in case they need to be replaced as well. The harness that connects to the switch features a slip-on terminal for easy installation.

Fixes these symptoms

Element will not heat
Oven is too hot
Oven not heating evenly
See more...

Videos!

Your Price

$67.66

Roper Range Oven Bake Element

★★★★★

38 Reviews

PartSelect Number PS11752501

Manufacturer Part Number WPW10308477

This Whirlpool OEM 2400-watt bake element has push-on terminals and is located on the bottom of the oven cavity. The bake element supplies heat while baking. If the oven is not heating properly the bake element may have burned out. If the element has burned out there would be visible damage such as holes, cracks, or blisters. When replacing the element, do not allow the wires to fall back through the rear of the oven. Disconnect the power to the range before starting your repair.

Fixes these symptoms

Element will not heat
Little to no heat when baking
Oven is too hot
See more...

Videos!

Your Price

$17.00

Roper Range Drip Bowl - 6 Inch

★★★★★

9 Reviews

PartSelect Number PS2366565

Manufacturer Part Number W10196406RW

This part has been substituted by the manufacturer and has a hole in the center. It no longer has a solid bottom.

Fixes these symptoms

Element will not heat
See more...

Your Price

$109.53

Roper Range Oven Bake Element 2600w 240v

★★★★★

2 Reviews

PartSelect Number PS11740695

Manufacturer Part Number WP308180

This closed hinged style bake element is 15-3/4 inches long and 16-5/8 inches wide. The terminal depth is three inches and they are 1-3/4 inches apart.

Fixes these symptoms

Element will not heat
Little to no heat when baking
Oven is too hot
See more...

Videos!

Your Price

$108.70

Roper Range Oven Sensor

★★★★★

50 Reviews

PartSelect Number PS11749737

Manufacturer Part Number WPW10181986

This temperature sensor detects the temperature within the oven cavity. This oven temperature sensor, for ranges, works together with the oven control board to measure and regulate the oven temperature. The sensor detects the temperature in the oven cavity. If the following symptoms occur, replacing the temperature sensor could be the solution: Little or no heat when baking, oven not heating evenly, oven will not start, and/or oven is overheating. Often, if the sensor is defective, the oven temperature will fluctuate and be inaccurate by more than 50 degrees. The tool needed for this replacement is a #2 square head screwdriver or a #2 Philips screwdriver. Remember to unplug the range before installing the part.

Fixes these symptoms