Maytag/Maytag_Thumb/HSDIUUU9.gif
See part 7 in the diagram
Replacing your Whirlpool Range Oven Bake Element play video
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.ca

Oven Bake Element

★★★★★
★★★★★
14 Reviews
$66.89   On Order

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS11752501
Manufacturer Part Number WPW10308477
Manufactured by Whirlpool
Product Description

Oven Bake Element Specifications

This bake element has push-on terminals and is found on the bottom of the oven.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Little to no heat when baking | Element will not heat | Oven not heating evenly | Will Not Start
This part works with the following products:
Range.
This part works with the following products:
Whirlpool, Kenmore, Amana, Roper.
Part# WPW10308477 replaces these:
AP6019197, 3195067, 8053713, 814432, 9758519, 9758541, W10308477, WPW10308477VP
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

22 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
December 8, 2017
I got the new baking element, I connected put back the power but element is not working although the tester shows power on attachment connections.
For model number WFE361LVT0
Hi John, Thank you for the question. If the element tested good and it is not turning on, it sounds like an issue with the Electronic Control Board. This board controls the oven operations and might be defective. Hope this helps!

6 people found this helpful.

Was this helpful?
Thank you for voting!
Dave
November 12, 2017
How do you check the bake element to make sure it is bad?
For model number RF265LXTT0
Hi Dave, Thank you for your question. You will have to remove the element from your appliance. You would test your element with a multi meter to check to see if it is working correctly. This element should show a reading between 0 and 50 ohms of resistance. I hope that helps. Good luck with your repair.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Jennell
November 14, 2019
Will product number wpw10308477 be compatible with rf303pxkq?
For model number RF303PXKQ
Hello Jennell, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is Manufacturer Part Number WPW10308477. Hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Mary
November 22, 2019
How wide is the element?I
For model number WPW10308477
Hi Mary, it is almost 21 inches wide. Thank you for your question and good luck with your repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Josephine
May 20, 2019
My oven has stopped heating completely, neither the bottom element nor the broil element even get warm. Is it possible to repair the problem? Thank you.
For model number 1RE32303
Hello Josephine, thank you for inquiring. For this symptom you will want to replace either the Safety Thermostat part PS11740991 or the Oven Sensor part PS11749737. We hope this helps.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Pat
November 4, 2019
What is the wattage of the bottom oven element of my range?
For model number AER5844VCS0
Hi Pat, Thank you for your question. The bake element is 2400 Watts. I hope this helps. Thank you and have a great day!

1 person found this helpful.

Was this helpful?
Thank you for voting!
CLIFFORD
November 8, 2019
The lower and upper heating elements will not heat up ! All of the numbers and buttons on the cercuit board seam to work just fine
For model number RF265LXTB3
Hello Clifford, thank you for your question. The most likely issue is a bad electronic control board PartSelect Number: PS11728037. However, we would recommend testing the sensor first, as this could also cause that issue. If the sensor is fine, the board should be replaced. The sensor is PartSelect Number: PS11749737. Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. Hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Earl
December 22, 2019
Can this part be picked up in houston,texas today?
For model number Wpw10308477
Hello Earl and thank you for writing. No, sorry we are selling online only and shipping to customers, we do not have any storefronts. We hope this helps. Please contact us anytime.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Terry
January 21, 2020
This is a Whirlpool baking element h*ow do i attach to my oven
For model number Rf364lxmt0
Hello Terry, thank you for your question. The bake element is PartSelect Number: PS11752501. There is an installation video at the link for this part. Here is the link that will provide the installation instructions. https://www.partselect.com/PS11752501-Whirlpool-WPW10308477-Oven-Bake-Element.htm?SourceCode=4&SearchTerm=RF364LXMT0&ModelNum=RF364LXMT0

1 person found this helpful.

Was this helpful?
Thank you for voting!
Mike
January 30, 2020
Need a new bake element. Can you help me with part. Roper stove
For model number rme3230 2
Hello Mike, thank you for your question. The bake element for this unit is Part Number: PS11752501. I hope this helps.

Was this helpful?
Thank you for voting!
Part Videos

Replacing your Whirlpool Range Oven Bake Element

Replacing your Whirlpool Range Oven Bake Element play video
Customer Repair Stories
 Average Repair Rating: 4.5 / 5.0, 24 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
heating element burnt up
first I pulled the stove from the wall. Then unplugged the stove from the wall (electric stove) for safety. then I removed the middle back panel screws(2) and then the panel. I then pulled the wires off the heating element that was bad. I took the screws (2) off the heating element inside the oven. I had to use WD-40 to loosen the screws because with the heat they were really stuck. I removed the heating element and replaced it with the one I got through partselect.com. Put everything back and walla finished. Partselect.com sent me the right part at the right price and fast. No hassles at all.
  • Esther from San Antonio, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
  • Parts Used:
    WPW10308477
92 of 101 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Baking element on stove wouldn't heat
Went online and located the correct part, which I had shipped to me next day. The part arrived I removed the two screws which held the element in place, unclipped the two wire leads, then replaced old element with the new one, reattached wire clips then screwed new element in place. All done 10 min.
  • Reggie from Piedmont, SC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
  • Parts Used:
    WPW10308477
38 of 42 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lower element went out
I removed the two screws that held the element in place . I think pulled out the element and disconnected the two wires. I put the new element in and connected the two wires. I went to put the element back in and something sparked and burned up the wire. Lesson learned - turn the electricity off first. I had to pay a repair man to come out and replace the wire.
  • Kimberly from Palestine, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
  • Parts Used:
    WPW10308477
17 of 21 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Heating element burned up
It was simple. Unscrewed to screws at the back of the oven. Slipped off the wire connectors then attached the wire connectors to the new part, put the screws back in and we were back in business.
  • Jerry D from Spring Valley, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
  • Parts Used:
    WPW10308477
8 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The oven was blowing a circuit.
Unplugged unit from wall.
Unscrewed the two screws on at he back of the oven where the element is attached
Removed old element by pulling apart the connectors.
Attached new element to the connectors.
Replaced cover with the two screws.
  • Rhonda from Logan, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
  • Parts Used:
    WPW10308477
5 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bake Element Does not Heat
I installed th for a refue Temperature Sensor and that was the fix. I did not need to install the bake element. I returned the bake element
  • Harold from ALEXANDRIA, VA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
  • Parts Used:
    WPW10308477, WP8053344
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven not browning on top. Temp not adequate. Top element not producing heat.
I actually found a loose connection . After receiving parts I removed back cover. Only then did I find a loose connection to the element . I cleaned and repaired the connection and replaced the sensor which was faulty. The element awaits a time review of my decision to not use it.
  • Roy from Logan, NM
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
  • Parts Used:
    WPW10308477, WP8053344
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The heating coil was no longer working.
My husband pulled the oven out and unscrewed the screws(in the back) the heating element came right out. He did everything on his own. The only thing he needed a little help with was for me to keep the heating coil flush to the back wall of the oven, while he screwed the new one in. It was a very quick job. The longest part was pulling the oven out to get behind it and sliding it back in.
  • Amanda from Midwest City, OK
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
  • Parts Used:
    WPW10308477
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bake element was taking time to warm up
Wire connection was damaged, replaced end piece
  • Jean-Claude from Miami, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Parts Used:
    WPW10308477
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
element went out on the stove
My wife did it! I got home one night and my wife had done it! That's how easy it was! Trust me, he is no handyman (woman) but she did it by herself. The part came fast, the price was better than any one else's
  • christopher from harrisburg, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
  • Parts Used:
    WPW10308477
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
14 Reviews
4.8
Filter By Rating:
  • 5 Stars
    13
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    1
  • 1 Star
    0
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11752501
Manufacturer Part Number: WPW10308477
Brand
Model Number
Description
Amana
4KAER5500AW0
Range - 30" ELECTRIC FREESTANDING RANGE
Maytag
4KMER7600AW0
Range - 30" ELECTRIC FREESTANDING RANGE
Whirlpool
4KMER7600AW1
Whirlpool
4KWFC120MAW0
Range
Whirlpool
4KWFC120MAW1
Whirlpool
4RF302BXEQ1
Range - Freestanding, Electric
Whirlpool
4RF302BXGQ0
Range - Freestanding, Electric
Whirlpool
4RF302BXGQ1
Range - Freestanding, Electric
Whirlpool
4RF302BXKQ0
Range - Freestanding, Electric
Whirlpool
4RF302BXKQ1
Range - Freestanding, Electric
Whirlpool
4RF315PXEQ0
Range - Freestanding, Electric
Whirlpool
4RF315PXGQ0
Range - Freestanding, Electric
Whirlpool
4RF315PXKQ0
Range - Freestanding, Electric
Whirlpool
4RF315PXMQ0
Range - Freestanding, Electric
Kenmore
66495272502
Range
Kenmore
66495273502
Range
Kenmore
66495274502
Range
Kenmore
66495279502
Range
Kenmore
66565025101
Range
Kenmore
66592002100
Range
Kenmore
66592002101
Range
Kenmore
66592002102
Range
Kenmore
66592004100
Range
Kenmore
66592004101
Range
Kenmore
66592004102
Range
Kenmore
66592005101
Range
Kenmore
66592005102
Range
Kenmore
66592012100
Range
Kenmore
66592012101
Range
Kenmore
66592012102
Range

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service